M Precision EP62 Power Quality Failure Module

AC Inputs/Outputs

• Input Voltage for 100%: 50 to 240V at 50Hz and to 277V at 60Hz
• Output Voltages on the Selected Phase: 0% (open or short), 40%, 50%, 70%, 80%, 90%, 100%, 110%, 120%, and 150%
• Output Current: 32A at 250V; 30A at 125V*
• Inrush Current: >250A at 120V; >500A at 220 to 240V
• Event Duration: From 0.03 cycle (10°) to 500 minutes; maximum 12 events per cycle
• Switching Times: 1 to 5µs into a 100 ohm load
• Overshoot: <5%
• Undershoot: <5%

* The actual AC mains voltage and current limit is based on the mains connector selected.

Measurements

• rms Voltage 0-300V, 0.5% of range + 1% of reading
• rms Current 0-40A, 0.5% of range + 1% of reading
• Peak Current 0-1000A, 1% of range + 5% of reading
• Inrush Current Qualification Internal, built-in circuit according to IEC 61000-4-11; automatically measures peak inrush current at 90&DEG; and 270&DEG; (peak values are reported via the control software)
• Minimum System Requirements: E100 series control center

• Calibration certificate
• Manual
• Any/all additional standard accessories