Close
You have no items in your shopping cart.

ISO Logo

ISO (International Organization for Standardization) is an independent, non-governmental international organization that holds membership of 165 national standards bodies. There is only one member per country and they represent ISO in their country. These members influence the development of ISO standards by participating and voting in ISO technical and policy meetings. By bringing experts together internationally, ISO uses their shared knowledge to develop consensus-based and market-relevant international standards that provide solutions to current global challenges and support innovation. Once implemented, these standards institute an acceptable reference for evaluating equipment to ensure equipment safety and repeatable results. ISO also works closely with IEC (International Electrotechnical Commission) on all Electrotechnical standardization matters.

Avalon Test Equipment carries a variety of equipment from top manufacturers (EM Test, Teseq, and more) to meet ISO test standards. Search by standard and Test With Confidence®.

Read More

Read Less

3 Items in Grid 4 Items in Grid List

EM Test VDS 200Q100 4-Quadrant Voltage Drop Simulator

The VDS 200Q series is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Available to rent!

EM Test VDS 200N15 Automotive Voltage Drop Simulator 60V/15A

The VDS 200N series is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements.

EM Test LD 200N Load Dump Generator

In stock and ready to rent at Avalon! Load Dump pulses simulate a sudden battery disconnection from the alternator.

EM Test UCS 200N100 Ultra-Compact Simulator

The UCS 200N100 by EM Test is in stock and ready to rent! The Ultra-Compact Simulator series for Automotive Transients unifies the capabilities of an EFT/Burst simulator, a Micro-pulse simulator, and the required coupling network into one box. Lab staff with over 20 years of technical experience. Customer service is our top priority. Immediate sales assistance along with same day shipments. Rent from Avalon Test Equipment.

Teseq NSG 4070C-45 Compact Immunity Test System

Compact immunity test system NSG 4070C, 4 kHz–1 GHz RF generator and power meter (with integrated power amplifier 45 W module 9 kHz–1 GHz)

Teseq NSG 4070C-80 Compact Immunity Test System

With integrated power amplifier 80 W module 150 kHz–230 MHz

CE Mark Product Package for IEC/EN 61000-4 Series Compliance

EM Test NX5, Teseq NSG 4070C-80, and 3ctest EDS 16H

EM Test CWS 500N3 Test Generator

Key applications of the CWS 500N3 are in the automotive and aerospace area. Various international standards and MIL requirements call for magnetic field tests in the low frequency range. Apart from this the automotive industry requires conducted immunity tests with superposed sinusoidal signals on the DC supply voltage (ripple noise). For both applications the CWS 500N3 is the perfect equipment including everything in a single box, necessary for these tests. The CWS 500N3 meets requirements of SAE J1113-2, ISO 11452-8, DO 160D/E Section 18 and MIL-STD-461 D/E/F/G CS101, CS109 and RS101.

EM Test ESD NX30 ESD Simulator/Gun

The EM Test ESD NX30 is an ESD tester to simulate ESD pulses at higher voltages up to 30 kV in both air and contact discharge mode. It satisfies requirements exceeding the EN/IEC 61000-4-2 test levels and complies with automotive test applications.

Fischer F-52 Current Monitor Probe

Fischer F-52 Current Monitor Probe 10kHz – 500MHz

Teseq CBA 1G-070B Broadband Power Amplifier

New, high power density, design has allowed us to produce a 70 W 1 MHz to 1 GHz amplifier in a compact 3U package. With a minimum of 55 W of linear power this amplifier is ideal for RF immunity testing in a GTEM and for 3V/m testing with a wide range of available antenna.

Teseq CIP 9136A Bulk Current Injection Test Clamp

Wide frequency range 10 kHz - 400 MHz High power handling (up to 1 kW) Ideal for automotive BCI testing e.g. ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and manufacture‘s requirements Meets IEC/EN 61000-4-6 Replacement for CIP 36A & 37A as specified in Defence Standard 59-41

Teseq NSG 3040-IEC Multifunction Burst Generator

Teseq’s new NSG 3040 is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards.

Teseq NSG 435 ESD Simulator/Gun

16.5kV Air, 9kV Contact

Teseq NSG 437 Automotive ESD Simulator/Gun

Teseq NSG 437-AUTOMOTIVE ESD Simulator/Gun, 30kV includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual

Teseq NSG 437 ESD Simulator/Gun

Teseq NSG 437 ESD Simulator/Gun, 30kV Includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual

Teseq NSG 438 ESD Simulator/Gun

30kV ESD Simulator/Gun with built in charge remover

Teseq Strip Line 90 Ω

90 Ω DC–1000 MHz

Teseq CDN 500 Capacitive Coupling Clamp

Manufactured exactly in accordance with the drawings and specifications of ISO 7637-3 for capacitively coupling the transients onto cables and wiring harnesses. With its characteristic impedance of 50 Ω , connected to the generator via a coaxial cable and terminated on the far side with a 50 Ω load resistor.

Teseq AES 5501 Automotive Emissions System

A system of electronic and mechanical switches, an artificial network, and a unique control station designed for emissions testing to ISO 7637-2.

Teseq NSG 5500-1 Automotive Transient Immunity Tester

Included in base system: HV Supply, Processor, Power Entry Module, RS232 Interface, IEEE Interface, CDN 5500 100A coupler, FT 5530 Fast Transient Generator, Autostar Software, traceable calibration certificate.

EM Test VDS 200N50 Voltage Drop Simulator

Voltage Drop Simulator, 60V/50A

EM Test PFS 200N100 Power Fail Simulator 80V100A

The PFS 200N Series Automotive Power Fail simulator is used to comply with standard requirements, mainly from vehicle manufacturers, to perform fast voltage dips ad drops (micro-interruptions). Some standards specify very fast rise and fall times below 1 microsecond an electronic switch.

EM Test PFS 200N30 Simulator

The EM Test PFS 200N30 automotive power fail simulator for voltage dips and interruptions is used to comply with standard requirements including ISO 16750-2, mainly from vehicle manufacturers, to perform fast voltage dips ad drops (micro-interruptions). Some standards specify very fast rise and fall times below 1 microsecond an electronic switch.

EM Test PFS 200N200 Power Fail Simulator 80V/200A

The PFS 200N Series Automotive Power Fail simulator is used to comply with standard requirements, mainly from vehicle manufacturers, to perform fast voltage dips ad drops (micro-interruptions). Some standards specify very fast rise and fall times below 1 microsecond an electronic switch.

EM Test PFS 200N50 Power Fail Simulator 80V50A

The PFS 200N Series Automotive Power Fail simulator is used to comply with standard requirements, mainly from vehicle manufacturers, to perform fast voltage dips ad drops (micro-interruptions). Some standards specify very fast rise and fall times below 1 microsecond an electronic switch.

Haefely AXOS5 Compact Immunity Test System

Haefely AXOS5 Compact Immunity Tester combines 5kV Burst/EFT, Surge combination wave, AC/DC Dips & Interrupts, along with an integrated single-phase coupling/decoupling network (CDN) into one compact system.

Teseq SL 50 Strip Line

The transversal electromagnetic mode which can be developped in the SL 50 strip line, provides the opportunity for doing EMC testing inside the strip line. The geometrical dimensions having a line impedance of Z = 50 Ω. At the end is required a 50 Ω termination.

EM Test CWS 500N1.4 Test Generator

RF Conducted Immunity Test System

EM Test ACC Capacitive Coupling Clamp

Used to couple fast transient pulses to I/O lines as required in different national and international standards and car manufacturer specifications for automotive testing.