Impedance Stabilization Networks

150kHz to 30MHz

9 kHz–30 MHz, 50/250 uH, 500 VAC

9 kHz–30 MHz

10 kHz–400 MHz, 5 microhenry / 50 Amps

Solar 9247-50-TS-50-N LISN for CISPR 16-1, FCC Part 15, ANSI C63.4

100 kHz to 100 MHz

Suitable for cat.6 (250 MHz)

The calibration kit CAS ISN is made for function tests and remeasurements on impedance stabilization network (ISN) for unshielded balanced pairs. Measuring parameters are common mode (CM) impedancence, phase angle, voltage division factor, decoupling attenuation (isolation) and longitudinal conversion loss (LCL). Impedance stabilization networks (ISN) are defined in CISPR 22 and CISPR 16-1-2.

150 kHz to 230 MHz

150 kHz to 230 MHz

150 kHz to 230 MHz

Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs 150 kHz to 80 MHz

10 kHz–400 MHz, 5 microhenry / 25 Amps

10 kHz–10 MHz, 50 microhenry / 100 Amps

150 kHz to 30 MHz

100 kHz–08 MHz

150 kHz–30 MHz

10 kHz–10 MHz, 50 microhenry / 25 Amps

150 kHz–30 MHz

Impedance stabilization networks (ISN, or with CISPR 16-1-2 called AAN: asymmetric artificial network) are defined for measuring of conducted common mode disturbances at information technology equipment (ITE) as required in CISPR 22 and CISPR 32. The ISN is placed between the equipment under test (EUT) and auxiliary equipment (AE) or load which are necessary for the operation of the EUT.

For Power Line Telecommunication (PLT) 1.6 to 30 MHz

150 kHz–30 MHz

150 kHz to 30 MHz, CISPR 16-1-2 / ANSI C63.4, 50 microhenry / 20 Amps

150 kHz–30 MHz

For Power Line Telecommunication (PLT)

Impedance Stabilization Network for 8 lines

For ISPR 16-1-2/ANSI C63.4, 9 kHz - 30 MHz.

Intended for connection to cable category 6

For use with coaxial lines, 150 kHz to 230 MHz

For use with screened RJ45 connections, 150 kHz to 230 MHz