Close
You have no items in your shopping cart.

Teledyne Lecroy ZS4000 Active Differential Oscilloscope Probe

Manufacturer part number: ZS4000
Teledyne LeCroy ZS4000 Active Differential Oscilloscope Probe; 4GHz, 0.6pF, 1MΩ
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Teledyne LeCroy ZS4000 Active Differential Oscilloscope Probe; 4GHz, 0.6pF, 1MΩ

The Teledyne LeCroy ZS-Series probes provide high impedance and an extensive set of probe tips and ground accessories to handle a wide range of probing scenarios. The high 1MΩ input resistance and low 0.9pF input capacitance means this probe is ideal for all frequencies. The ZS-Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes with bandwidths of 2.5GHz and lower.

Compatibility: all ProBus Oscilloscopes.

  • Straight Pin Lead, Short
  • Straight Pin Lead, Long
  • Right Angle Lead, Short
  • Right Angle Lead, Long
  • Y Lead Adapter
  • Micro-Grabber Pair
  • Ground Blade, Wide
  • Probe Tip, Standard, qty 3
  • Right Angle Socket
  • Offset Ground, Z Lead
  • Ground Blade, Narrow
  • Copper Tape, qty 2
  • Pogo Tip
  • 2.54mm Square Pin Adapter
  • Channel ID Clips (Set of 4 colors), qty 4
  • Freehand Probe Holder
  • Bent Tip
  • IC Tip
  • Pogo Ground Lead
  • Instruction Manual
  • Certificate of Calibration
  • 4.0GHz bandwidth
  • Easy to use, integrated with oscilloscope
  • High Signal Fidelity to 4GHz Bandwidth
  • Low Circuit Loading - High Input impedance and low capacitance
  • ±8V input dynamic range
  • 1MΩ input resistance
  • 0.6pF input capacitance
  • ±12V offset range
  • ProBus interface
  • Wide variety of tips and leads

Description

Teledyne LeCroy ZS4000 Active Differential Oscilloscope Probe; 4GHz, 0.6pF, 1MΩ

The Teledyne LeCroy ZS-Series probes provide high impedance and an extensive set of probe tips and ground accessories to handle a wide range of probing scenarios. The high 1MΩ input resistance and low 0.9pF input capacitance means this probe is ideal for all frequencies. The ZS-Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes with bandwidths of 2.5GHz and lower.

Compatibility: all ProBus Oscilloscopes.