Close
You have no items in your shopping cart.

Teledyne LeCroy WAVEJET TOUCH 334T Oscilloscope

Manufacturer part number: WJ334T
Teledyne LeCroy WAVEJET TOUCH 334T Oscilloscope: Teledyne LeCroy WAVEJET TOUCH 334T Oscilloscope: 350MHz, 5Mpts, 4-channel, 2GS/s, 8-bit, Touch-Screen
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   1
+ -
$3,125.00Configurations
X

Available Configurations

350 MHZ, 1 GS/S, 4CH, 2.5 MPTS/CH DSO WITH 7.5" TO
30008839
$3125
OPTIONS
NamePurchase
16 Ch, 1GS/s, 100MHz USB Logic Analyzer$0.00
Rack Mount Accessory$0.00
Soft Carrying Case$0.00

Teledyne LeCroy WaveJet Touch 334T Touchscreen Color Digital Oscilloscope

The Teledyne LeCroy WaveJet Touch provides the performance, features, and touch screen user interface to simplify operation and shorten debug time. The compact design features a 7.5in touch screen, providing the convenience of touch operation in a portable design. With up to 5Mpts of memory and 2GS/s, every detail of the waveform can be captured and easily measured. The all-inclusive WaveJet Touch delivers maximum value for minimum investment.

Touch Screen Control

Touch screen operation simplifies how all aspects of the oscilloscope are controlled, increasing productivity and decreasing setup time. Intuitively touch controls instead of navigating confusing soft keys.

Shorten Debug Time

Intricate signals can be quickly acquired by combining a long capture time with a variety of complex triggers, including triggers for I2C, SPI, and UART. Pass/fail mask and measurement testing enables deeper analysis and performs characterization and validation testing with ease. Scroll back in time to view previous waveforms and isolate anomalies using Replay mode.

Portable Performance

The small form factor and light-weight design make it easy to carry and use anywhere. Coupled with an ultra-quick boot time, the WaveJet Touch is ready to use when needed. The WaveJet Touch is on and acquiring signals in less than 5 seconds, enabling measurements to begin immediately.

Flexible Connectivity

Easily document results by saving screenshots directly to a memory stick or printer. Standard GPIB, LAN, and USB connections enable easy remote control. Using Teledyne LeCroy's WaveStudio the WaveJet Touch can quickly connect to a PC.

  • One probe per channel
  • Manuals
  • Power cord
  • All standard accessories

Vertical

  • Bandwidth (@50Ω) 350MHz
  • Rise Time 1ns (typical)
  • Input Channels Four
  • Vertical Resolution 8-bits
  • Sensitivity, 50Ω: 2mV/div to 2V/div
  • Sensitivity, 1MΩ: 2mV/div to 10V/div
  • DC Gain Accuracy: ±(1.5% of + 0.5% of Full Scale)
  • Bandwidth Limiting Filter: 200kHz, 2MHz, 20MHz, 100MHz
  • Maximum Input Voltage, 50Ω: 5Vrms
  • Maximum Input Voltage, 1MΩ: 400Vpk CAT I
  • Input Coupling, 50Ω: DC, GND
  • Input Coupling, 1MΩ: AC, DC, GND
  • Input Impedance, 50Ω: ±1.0%
  • Input Impedance, 1MΩ: ±1.0%, 16pF (typical)
  • Offset Range, 2mV/div to 50mV/div: ±1V
  • Offset Range, 50.2mV/div to 500mV/div: ±10V
  • Offset Range, 502mV/div to 10V/div: ±100V
  • Offset Accuracy, 2mV/div to 50mV/div: ±(0.5% of offset value + 0.5% FS + 1mV)
  • Offset Accuracy, 50.2mV/div to 500mV/div: ±(0.5% of offset value + 0.5% FS + 10mV)
  • Offset Accuracy, 502mV/div to 10V/div: ±(0.5% of offset value + 0.5% FS + 100mV)

Acquisition

  • Sampling Rate (Single Shot): 2GS/s (interleaved), 1GS/s (all channels)
  • Sampling Rate (Equivalent Time): 100GS/s
  • Record Length: 5Mpts/Ch (interleaved), 2.5Mpts/Ch (all channels)
  • Acquisition Modes: Real Time, Peak Detect, Average, High Resolution
  • Real Time Timebase Range: 1ns/div to 50s/div
  • Roll Mode Timebase Range: 50ms/div to 50s/div
  • Peak Detect Period: 1ns
  • Timebase Accuracy: 10pmm (typical)

Measure, Zoom, Math, Replay Mode

  • Measure: Base, Cycle Mean, Cycle RMS, Duty Cycle, Fall Time (90-10%), Fall Time (80-20%), Frequency, Integral, Maximum, Mean, Minimum, Number of +Pulses, Number of -Pulse, +Overshoot, -Overshoot, Peak-Peak, Period, +Pulse Width, -Pulse Width, Rise Time (20-80%), Rise Time (10-90%), RMS, Skew, Skew@level, Top, Top-Base
  • Zoom: Use front panel QuickZoom button to zoom all waveforms in a separate zoom grid
  • Math: Sum, Difference, Product, Integral, Derivative, FFT (up to 8kpts with Rectangular, Von Hann, or Flat Top windows
  • Replay Mode: Look back at the history of waveform acquisitions (maximum 2,048 acquisitions)

Display System

  • Display Size 7.5" TFT-LCD Touch-Screen
  • Display Resolution 640 x 480 VGA

Input/Output Interfaces

  • Aux Out: Trigger output or pass/fail output
  • USB: USB host port for flash drives, USB device port for connecting to PC and direct printer connection
  • LAN: 10/100Base-T Ethernet interface (RJ-45 connector)
  • GPIB: Supports IEE-488.2

Physical

  • Dimensions: 7.5"H x 13"W x 4.9"D (190mm x 330mm x 124mm)
  • Weight: 3.7kg (8.16lbs)

Mains

  • Voltage: 100 to 240V (±10%) at 50/60Hz (±5%), 100 to 120V (±10%) at 400Hz (±5%)
  • Power Consumption (Max): 50W
Description

Teledyne LeCroy WaveJet Touch 334T Touchscreen Color Digital Oscilloscope

The Teledyne LeCroy WaveJet Touch provides the performance, features, and touch screen user interface to simplify operation and shorten debug time. The compact design features a 7.5in touch screen, providing the convenience of touch operation in a portable design. With up to 5Mpts of memory and 2GS/s, every detail of the waveform can be captured and easily measured. The all-inclusive WaveJet Touch delivers maximum value for minimum investment.

Touch Screen Control

Touch screen operation simplifies how all aspects of the oscilloscope are controlled, increasing productivity and decreasing setup time. Intuitively touch controls instead of navigating confusing soft keys.

Shorten Debug Time

Intricate signals can be quickly acquired by combining a long capture time with a variety of complex triggers, including triggers for I2C, SPI, and UART. Pass/fail mask and measurement testing enables deeper analysis and performs characterization and validation testing with ease. Scroll back in time to view previous waveforms and isolate anomalies using Replay mode.

Portable Performance

The small form factor and light-weight design make it easy to carry and use anywhere. Coupled with an ultra-quick boot time, the WaveJet Touch is ready to use when needed. The WaveJet Touch is on and acquiring signals in less than 5 seconds, enabling measurements to begin immediately.

Flexible Connectivity

Easily document results by saving screenshots directly to a memory stick or printer. Standard GPIB, LAN, and USB connections enable easy remote control. Using Teledyne LeCroy's WaveStudio the WaveJet Touch can quickly connect to a PC.

Product tags