Close
You have no items in your shopping cart.

Teseq NSG 435 ESD Simulator/Gun

Manufacturer part number: NSG-435
16.5kV Air, 9kV Contact
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

OPTIONS
NamePurchase
US Version$0.00
MAINS POWER SUPPLY$0.00
SPARE BATTERY PACK$0.00
OPTO-LINK CONTROL$0.00
100pF 1500 OHM NETWORK$0.00

Ergonomic design and advanced functionality. The pistol-shaped NSG 435 simulator is designed to sit comfortably in the operator’s hand, with current operating conditions constantly displayed and clearly visible. The microprocessor-based controller and multifunction keypad provide the operator with instant access to its comprehensive range of built-in functions. The LCD panel continuously displays the operating status and all user-selected test parameters.

The NSG 435 has its own internal, battery-operated high voltage generator. In addition to the pre-programmed, standard IEC pulses, the user can create custom tests using single or repetitive discharges with selectable rates and manual or automatic polarity switching. An optional mains supply is available for extended test operation or for use when the battery is being charged.

A range of interchangeable discharge networks is available, including EN, ANSI-IEEE, and ISO. The unit comes with a standard 150 pF/330 Ω discharge network for tests to IEC/EN 61000-4-2.

Features:

  • Programmable discharge voltage 200 V to 16.5 kV
  • Stabilized charging voltage
  • Pre-programmed IEC/EN 61000-4-2 test settings
  • True air-discharge breakdown voltage
  • Battery-powered
  • Compact and lightweight design
  • Comfortable use and convenient operation
  • Carrying case
  • Battery pack
  • Battery charger 100 to 240VAC
  • Discharge network 150pF/330Ω
  • Air- and contact-discharge tips
  • Grounding cable
  • Tripod adapter
  • User manual

Pulse Network

  • Network 150pF/330Ω per IEC/EN 61000-4-2 (included)
  • Range of R/C networks for other standards: R = 0 Ω to 10 kΩ; C = 60 to 500pF

Discharge voltage

  • Air-discharge: 200V to 16.5kV (in 100V steps)
  • Contact-discharge: 200V to 9kV (in 100V steps)

Discharge tips

  • Ball and point per IEC

Charging voltage measurement

  • kV, accuracy better than ±5% (stabilized); measurement and display of true air flashover voltage

Discharge detection

  • Indicated by an oval around the kV symbol, also acoustically in the Single operating mode (air-discharge only)

Holding time

  • >5s (charging voltage ±5%)

Polarity

  • Positive/negative/automatic change

Operating modes

  • Single/repetitive
  • Pulse counter: 0 to 9999, preselect counter 0 to 9999
  • Continuous operation
  • Repetition: 0.5/1/5/10/20 or 25Hz (air); 0.5/1/5 or 10Hz (contact)

Display

  • LCD panel showing: charging voltage, discharge voltage, polarity, air-/contact-discharge, counter/preselect counter content, soft-key functions, battery monitor

Weight

  • NSG 435 with battery: ~1.2kg (~2.6lbs)

Ambient conditions

  • Operation: +5 to +40°C, 20 to 80% rh (non-condensing), 68 to 106kPa
  • EN 301489-17
  • EN 301489-24
  • EN 301489-7
  • EN 61000-4-11
  • EN 61000-4-2
  • EN 61000-4-4
  • EN 61000-4-5
  • EN 61000-6-1
  • EN 61000-6-2
  • IEC 61000-4-2
  • IEC 61326
  • ISO 7637
  • ITU-T K.20
  • ITU-T K.21
  • ITU-T K.28
  • ITU-T K.41
  • ITU-T K.44
  • ITU-T K.45

Description

Ergonomic design and advanced functionality. The pistol-shaped NSG 435 simulator is designed to sit comfortably in the operator’s hand, with current operating conditions constantly displayed and clearly visible. The microprocessor-based controller and multifunction keypad provide the operator with instant access to its comprehensive range of built-in functions. The LCD panel continuously displays the operating status and all user-selected test parameters.

The NSG 435 has its own internal, battery-operated high voltage generator. In addition to the pre-programmed, standard IEC pulses, the user can create custom tests using single or repetitive discharges with selectable rates and manual or automatic polarity switching. An optional mains supply is available for extended test operation or for use when the battery is being charged.

A range of interchangeable discharge networks is available, including EN, ANSI-IEEE, and ISO. The unit comes with a standard 150 pF/330 Ω discharge network for tests to IEC/EN 61000-4-2.

Features:

  • Programmable discharge voltage 200 V to 16.5 kV
  • Stabilized charging voltage
  • Pre-programmed IEC/EN 61000-4-2 test settings
  • True air-discharge breakdown voltage
  • Battery-powered
  • Compact and lightweight design
  • Comfortable use and convenient operation