Close
You have no items in your shopping cart.

Teseq MD 4070 Monitoring Device

Manufacturer part number: MD 4070
The Teseq MD 4070 Monitoring Device 10 kHz to 400 (600) MHz is suitable for BCI testing per ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 CS114 and various automotive standards
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

About the Teseq MD 4070

The monitoring device MD 4070 can be used as an active or passive current sensor probe to measure the current in a conductor without connecting it directly. The MD 4070 allows fast and easy measurement as it can be quickly clamped around the current carrying conductor.

The MD 4070 is characterized over the frequency range from 10 kHz to 400 (600) MHz. The MD 4070 can be used for the procedure for clamp injection when the common-mode impedance requirements cannot be met given in chapter 7.4 of IEC/EN 61000-4-6 „Immunity to conducted disturbances, induced by radio frequency fields”. The MD 4070 can also be used as current monitor for BCI testing as per ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and various automotive standards.

Specifications & Features of Teseq MD 4070:

ParameterValue

Frequency range

10 kHz to 400 (600) MHz

Insertion loss

typical approx. -22 dB 
(50 Ω system, 100 kHz to 230 MHz)

Transfer impedance

typical approx. 4 Ω (100 kHz to 230 MHz)

Frequency response 100 kHz to 230 MHz

±1.5 dB

Frequency response 40 kHz to 400 MHz

typical +1.5 dB / -5 dB

Description

About the Teseq MD 4070

The monitoring device MD 4070 can be used as an active or passive current sensor probe to measure the current in a conductor without connecting it directly. The MD 4070 allows fast and easy measurement as it can be quickly clamped around the current carrying conductor.

The MD 4070 is characterized over the frequency range from 10 kHz to 400 (600) MHz. The MD 4070 can be used for the procedure for clamp injection when the common-mode impedance requirements cannot be met given in chapter 7.4 of IEC/EN 61000-4-6 „Immunity to conducted disturbances, induced by radio frequency fields”. The MD 4070 can also be used as current monitor for BCI testing as per ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and various automotive standards.