Tektronix TOP200 LC Optical Power Meter

Manufacturer part number: TOP200

$0.00

excluding shipping

Relative dB Mode for Direct Attenuation and Insertion Loss Measurements 0.01 dB Resolution

Qty:

+ -

Available Configurations

Overview
Specifications
Documentation

The TOP200 handheld optical power meter covers the full range of optical fiber applications. This instrument is quality engineered for field and lab personnel requiring a high performance, cost-effective, compact, and rugged optical power meter.

The TOP200 uses the Snap-On Connector (SOC) interface. Most industry-standard fiber optic connectors can be accommodated, including FC, ST, and SC.

The extraordinary design combines a state-of-the-art signal processor and microcomputer electronics to provide superb performance as well as simple and elegant operation with just three controls: ON/OFF, dBm/dB, and lambda. A reference value can be set and also saved for each wavelength.

Features:

Set reference for different wavelengths
Save references for each wavelength
Universal (SOC) interface
>100 hours battery life

Optical

Functions -
- dBm: Absolute Power
- dB: Relative Power Also Used to Save/Recall Reference Values
- Lambda: Select CAL Wavelength Also Used to Set Default/CAL Wavelength
- Sensor Type - InGaAs (1 mm).
- Power Range - +3 to -60 dBm.
- Cal Wavelengths - 850, 1310 and 1550 nm.
- Absolute Accuracy - ±0.25 dB at calibration conditions.
- Display - Custom triplexed liquid crystal display with 4-digit data field (0.01 dB resolution) and simultaneous display of cal wavelength.
- The display incorporates the following distinct annunciators: 850, 1310, 1550, dB, dBm, B (Low Bat) and C (CAL).
- Calibration Data - Data stored in nonvolatile memory.
- Connector Interface - Universal (SOC) Interface.
Power
- Source - Two AA alkaline batteries.
- Battery Life - >100 hours.
Environmental
- Temperature -
  - Operating: -15 °C to +55 °C, 0-95% RH (noncondensing).
  - Storage: -35 °C to +70 °C, 0-95% RH (noncondensing).

Datasheet

Description

The TOP200 uses the Snap-On Connector (SOC) interface. Most industry-standard fiber optic connectors can be accommodated, including FC, ST, and SC.

Features:

Set reference for different wavelengths
Save references for each wavelength
Universal (SOC) interface
>100 hours battery life

Product tags