The MDO4104-6 Mixed Domain Oscilloscope is the world's first oscilloscope with a built-in spectrum analyzer. You can capture time-correlated analog, digital, and RF signals for a complete system view of your device. See both the time and frequency domain in a single glance. View the RF spectrum at any point in time to see how it changes over time or with device state. Solve the most complicated design issues, quickly and efficiently, with an oscilloscope as integrated as your design.
Based on the industry-standard MSO4000B Oscilloscope Series, you can now use your tool of choice, the oscilloscope, to look at the frequency domain rather than having to find and re-learn a spectrum analyzer. However, the power of the MDO goes well beyond simply observing the frequency domain as you would on a spectrum analyzer. The real power is in its ability to correlate events in the frequency domain with the time domain phenomena that caused them.
When both the RF channel and any analog or digital channels are on, the oscilloscope display is split into two views. The upper half of the display is a traditional oscilloscope view of the Time Domain. The lower half of the display is a Frequency Domain view of the RF input. Note that the Frequency Domain view is not simply an FFT of the analog or digital channels in the instrument, but is the spectrum acquired from the RF input.
Features:
- 4 Analog Channels
- 1 GHz Bandwidth
- 16 Digital Channels
- MagniVu™ High-speed Acquisition provides 60.6 ps Fine Timing Resolution
- 1 RF Channel - 50 kHz to 6 GHz Frequency Range
- Ultra-wide Capture Bandwidth ≥1 GHz
- Standard Passive Voltage Probes 3.9 pF Capacitive Loading 1 GHz Analog Bandwidth
Mixed Domain Analysis
- Time-correlated Analog, Digital, and RF Signal Acquisitions in a Single Instrument
- Wave Inspector®Controls provide Easy Navigation of Time-correlated Data from both the Time and Frequency Domains
- Amplitude, Frequency, and Phase vs. Time Waveforms derived from RF Input
- Selectable Spectrum Time to Discover and Analyze how RF Spectrum Changes over Time - Even on a Stopped Acquisition
Spectral Analysis
- Dedicated Front-panel Controls for Commonly Performed Tasks
- Automated Peak Markers Identify Frequency and Amplitude of Spectrum Peaks
- Manual Markers enable Non-peak Measurements
- Trace Types Include: Normal, Average, Max Hold, and Min Hold
- Detection Types Include: +Peak, -Peak, Average, and Sample
- Spectrogram Display enables Easy Observation and Insight into Slowly Changing RF Phenomena
- Automated Measurements Include: Channel Power, Adjacent Channel
- Power Ratio (ACPR), and Occupied Bandwidth (OBW)
- Trigger on RF Power Level
- Triggered or Free Run Spectral Analysis
Ease of Use Features
- 10.4" (264 mm) Bright XGA Color Display
- Small Footprint and Lightweight - Only 5.8" (147 mm) Deep and 11 lb (5 kg)
Connectivity
- Two USB 2.0 Host Ports on the Front Panel and Two on the Rear Panel for Quick and Easy Data Storage, Printing, and Connecting a USB Keyboard
- USB 2.0 Device Port on Rear Panel for Easy Connection to a PC or Direct Printing to a PictBridge®-compatible Printer
- Integrated 10/100/1000BASE-T Ethernet Port for Network Connection and Video Out Port to Export the Oscilloscope Display to a Monitor or Projector
Optional Serial Triggering and Analysis
- Serial Protocol Trigger, Decode, and Search for I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay, RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM
Optional Application Support
- Advanced RF Triggering
- Power Analysis
- Limit and Mask Testing
- HDTV and Custom Video Analysis
