TEKTRONIX TBS2204B Oscilloscope

Manufacturer part number: TBS2204B

200 MHz

PURCHASE

Available	QTY	Price
New: 0	Qty: + -	$0.00
Used: 0	Qty: + -	$0.00	Configurations

Available Configurations

Overview
Specifications
Documentation

The new TBS2000B Digital Storage Oscilloscope is great at performing an oscilloscope's most important jobs - looking at and measuring signals. See more with its bigger 9-inch display with 15 horizontal divisions for more time per screen and 5M record length to capture long time windows. Measure more with handy cursors and powerful 32 automatic measurements. Share more with Wi-fi connectivity and 100-BaseT Ethernet port. This affordable scope delivers the performance you need.

Features:

5M point record length, 200 MHz bandwidth, and 2GS/s sample rate capture and display significantly more signal to debug and validate designs faster.
New lower noise front end design offers lower random noise, better signal integrity and more accurate measurements.
TekVPI™ probe interface supports wide range of active, differential, and current probes with automatic scaling and units.
On-waveform cursor readouts with search and mark features enable easy identification of events that occur in the acquired waveform.
Educators can disable the autoset, cursors, and automated measurements to facilitate teaching basic concepts.
Bandwidth is field-upgradeable.

Models	TBS2072B	TBS2074B	TBS2102B	TBS2104B	TBS2202B	TBS2204B
Analog Channels	2	4	2	4	2	4
Bandwidth	70 MHz	70 MHz	100 MHz	100 MHz	200 MHz	200 MHz
Max Sample Rate	2 GS/s - Half Channel 1 GS/s - All Channels	2 GS/s - Half Channel 1 GS/s - All Channels	2 GS/s - Half Channel 1 GS/s - All Channels	2 GS/s - Half Channel 1 GS/s - All Channels	2 GS/s - Half Channel 1 GS/s - All Channels	2 GS/s - Half Channel 1 GS/s - All Channels
Record length	5 M points	5 M points	5 M points	5 M points	5 M points	5 M points

Vertical system analog channels

Hardware bandwidth limits: 20 MHz, typical

Input coupling: DC, AC, or GND

Input impedance: 1 MΩ ± 1 %, 13 pF ± 1.5 pF

Input sensitivity range: 2mV/div 10 V/div

Vertical resolution: 8 bits

Maximum input voltage, 1 MΩ: 300 VRMS, Installation Category II; with peaks ≤ ±450 V

Acquisition modes

Sample: Acquire sampled values.
Peak Detect: Captures glitches as narrow as 3.5 ns at all sweep speeds.
Average: From 2 to 512 waveforms included in average.
Hi-Res: Averages multiple sample of one acquisition interval into one waveform point.
Roll: Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div (400 ms/div at 20M record length).

Waveform math

Arithmetic:

Add

Subtract

Multiply

FFT

DC balance: ± (1 mV +0.1 div)

DC gain accuracy

± 2% 10 V/div through 5 mV/div

± 3% typical 2 mV/div

DC voltage measurement accuracy average mode

Average of > 16 waveforms: ±((DC Gain Accuracy) X |reading - (offset - position)| + Offset Accuracy + 0.11 div + 1 mV)
Delta Volts between any two averages of ≥16 waveforms acquired with the same oscilloscope setup and ambient conditions: ±(DC Gain Accuracy X |reading| + 0.08 div + 1.4 mV)

Vertical position range: ± 5 divisions

Data Sheet

Description

Features:

5M point record length, 200 MHz bandwidth, and 2GS/s sample rate capture and display significantly more signal to debug and validate designs faster.
New lower noise front end design offers lower random noise, better signal integrity and more accurate measurements.
TekVPI™ probe interface supports wide range of active, differential, and current probes with automatic scaling and units.
On-waveform cursor readouts with search and mark features enable easy identification of events that occur in the acquired waveform.
Educators can disable the autoset, cursors, and automated measurements to facilitate teaching basic concepts.
Bandwidth is field-upgradeable.

Product tags