Close
You have no items in your shopping cart.

VIAVI Solutions T-BERD 5800 Handheld Network Tester – Contractor Package

Manufacturer part number: TB5800
The configurable T-BERD 5800 is the industry's smallest dual 10 G handheld instrument for Ethernet, SONET, SDH, OTN, Fiber Channel, and CPRI/OBSAI testing. BBU Emulation.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

OPTIONS
NamePurchase
TB5822P Dual 1GEthernet- Optics-patch cables$0.00
10GigE LAN Ethernet InterfaceSoftware$0.00
OC-3/STM-1 and OC-12/STM-4$0.00
OC-48/STM-16 InterfaceSoftware$0.00
E1/DS1 Electrical Interface Software$0.00
DS3/STS-1 Electrical Interface Software$0.00
Ethernet Service & LinkLayer OAM Test Opt Software$0.00
10/100/1000M, 1GigE Packet Capture Software$0.00
J-Proof Layer 2 Transparency Software$0.00
Low Speed10M - 1G J-Profiler Traffic Expl.$0.00

IN STOCK and available to RENT!

CPRI/BBU Emulation Complete Contractor Package

The T-Berd 5800 handheld network tester is the one tool that network technicians and engineers need to install, turn-up, and maintain their networks. It supports both the legacy and emerging technologies required to handle various network applications including metro/core, mobile backhaul, and business services installations. The industry’s smallest handheld instrument can test throughout the service lifecycle, including fiber characterization, service activation, troubleshooting, and maintenance. Advanced Ethernet test features such as TrueSpeed per RFC 6349, J-Profiler™, Wirespeed capture/decode, and automated J-Mentor, help field technicians test their networks faster and more accurately than ever before.

Features:

  • BBU Emulation
  • Fully-loaded TDM/PDH to dual 10 G Ethernet, SONET, SDH, Fiber Channel, and OTN support
  • Automated, enhanced RFC 2544 and SAMComplete testing per ITU-T Y.1564
  • RET
  • SFP
  • Wireless video inspection probe
  • Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed™ TCP throughput testing
  • Single- and dual-port versions
  • Compatible with Viavi 4100-Series OTDR modules and Smart Link Mapper™, fiber microscopes, and optical power meters

Applications:

  • Mobile and backhaul characterization, validation, and troubleshooting
  • Converged Ethernet/IP network testing and troubleshooting at 10 Mbps to 10 G interfaces
  • Fiber link characterization and troubleshooting
  • Installation and maintenance of OTN and legacy SONET/SDH and TDM/PDH networks
  • Remote radio head (RRH) testing at the wireless base station

Compatible with JDSU Fiber Test Tools:

Mobility, business services, and metro technicians can now test virtually any interface in their network as well as qualify fiber plant with one ultra-portable instrument. The T-Berd 5800 is compatible with:

  • MP-Series optical power meters for optical power and loss measurements
  • OTDR modules for fiber link characterization and fault finding
  • Smart Link Mapper optical analysis software that displays OTDR results in a simple, icon-based map view for clear diagnostics of the detected issue
  • Manual
  • TB/MTS-5811P; Single 10G W/PDH (mainframe)
  • CPRI rate 1-8 with Optics (10.1 Gbps)
  • RFoCPRI (RF over CPRI) Spectrum Analysis Option
  • BBU Emulation for ALU towers
  • 4126 MA Opt. S: OTDR 1310/1550 nm
  • C510GELAN-U1: TB5800 10GigE (Ethernet) Upgrade
  • MP-60: USB Power Meter
  • Softcase for MP60 Power Meter
  • FITP-UPP12 Adapter for MP60
  • USB cable extender for MP series OPM
  • Visual Fault Locator w/ soft case
  • FFL-050-U12 Adapter for Visual Fault Locator
  • FiberChek Probe (wireless inspection probe)
  • Soft Carrying Case for FiberChek Probe
  • Wrist strap with hardcover for the probe tip
  • FiberCheck charger, int'l adapters, USB cable
  • FBPT-LC Probe Tip for FBP probe microscope
  • FBPT-U12M Probe Tip for FBP probe microscope
  • Black "Viavi" Box for probe tips
  • Black Padded Shoulder Strap
  • Viavi Shoulder Strap
  • User Documentation on USB drive
  • Cable: EXTCLK (IN) adapter cable
  • Cable: Ethernet
  • Soft Carrying Case for TB5800
  • Accessories Pouch (attached to large soft case)
  • 10M SM Patchcord LC/PC to LC/PC
  • 3M Singlemode Duplex Patchcord LC-LC
  • Stylus for TB5800 (attached to TB5800)
  • Removable Plastic Front Cover
  • Back Cover (removed when OTDR module installed)
  • LC Singlemode Mating Sleeve
  • LCPC Non-Reflective Optical Terminators
  • 10Gb/s Ind Temp 10km Single-Mode Datacom
  • BNC(f) to SMA(m) adapter
  • Power Adapter/Charger for TB5800
  • Calibration Certificate
  • All test interfaces are readily available
  • Compact form factor for easy portability: 7x9.5x3in (17.8x24.1x7.62cm)
  • Large 7-inch multi-touch display
  • Tablet-like interface for easy navigation through test information and advanced workflows
  • Integrated WiFi and Bluetooth lets you easily connect test sets and offload results
  • Fixed test interfaces eliminate loose pluggable modules
  • LEDs indicate plug-ins for tests
  • A streamlined user interface provides simple pass/fail, green/red results
  • Extended battery life enables longer test times
  • Boots up rapidly from power-on to test start
  • Dual-port operation runs two tests simultaneously, including 10 G/high-speed test
  • Network discovery automatically identifies equipment present on the network
  • J-Profiler discovers live traffic streams for real-time troubleshooting with in-service top-talkers analysis
  • Integrated capture/decode offers 10 G line-rate packet capture and analysis in a handheld
  • J-Mentor provides expert troubleshooting guidance and interprets packet decode

Cell-Site Capabilities

  • When equipped with an OTDR module, the T-BERD/MTS-5800 is the perfect solution for mobile network testing, providing easy fiber link characterization and troubleshooting.
  • Validate C-RAN connectivity across CWDM networks
  • Test RRH health from the bottom of the tower by emulating a BBU
  • Gain crucial visibility into system health with monitoring and inline access
  • Verify network synchronization: Emulate a 1588v2 master clock/slave recovery for proper point-to-point (PTP) message propagation and packet-delay variation (PDV) verification
  • Verify SyncE frequency synchronization accuracy and Ethernet synchronization message channel (ESMC) message propagation
  • Measure wander on SyncE, 1PPS, T1, E1, and 2 and 10MHz signals
  • BBU Emulation
  • CPRI/OBSAI
  • IEEE 1588v2 PTP
  • IETF RFC 6349
  • ITU-T Y.1564
  • RFC 2544

Description

IN STOCK and available to RENT!

CPRI/BBU Emulation Complete Contractor Package

The T-Berd 5800 handheld network tester is the one tool that network technicians and engineers need to install, turn-up, and maintain their networks. It supports both the legacy and emerging technologies required to handle various network applications including metro/core, mobile backhaul, and business services installations. The industry’s smallest handheld instrument can test throughout the service lifecycle, including fiber characterization, service activation, troubleshooting, and maintenance. Advanced Ethernet test features such as TrueSpeed per RFC 6349, J-Profiler™, Wirespeed capture/decode, and automated J-Mentor, help field technicians test their networks faster and more accurately than ever before.

Features:

  • BBU Emulation
  • Fully-loaded TDM/PDH to dual 10 G Ethernet, SONET, SDH, Fiber Channel, and OTN support
  • Automated, enhanced RFC 2544 and SAMComplete testing per ITU-T Y.1564
  • RET
  • SFP
  • Wireless video inspection probe
  • Integrated burst testing approach per MEF 34 and RFC 6349 TrueSpeed™ TCP throughput testing
  • Single- and dual-port versions
  • Compatible with Viavi 4100-Series OTDR modules and Smart Link Mapper™, fiber microscopes, and optical power meters

Applications:

  • Mobile and backhaul characterization, validation, and troubleshooting
  • Converged Ethernet/IP network testing and troubleshooting at 10 Mbps to 10 G interfaces
  • Fiber link characterization and troubleshooting
  • Installation and maintenance of OTN and legacy SONET/SDH and TDM/PDH networks
  • Remote radio head (RRH) testing at the wireless base station

Compatible with JDSU Fiber Test Tools:

Mobility, business services, and metro technicians can now test virtually any interface in their network as well as qualify fiber plant with one ultra-portable instrument. The T-Berd 5800 is compatible with:

  • MP-Series optical power meters for optical power and loss measurements
  • OTDR modules for fiber link characterization and fault finding
  • Smart Link Mapper optical analysis software that displays OTDR results in a simple, icon-based map view for clear diagnostics of the detected issue