Close
You have no items in your shopping cart.

There have been test standards put into place by government agencies and globally recognized organizations for health and safety purposes. At Avalon Testing Equipment, our EMC and EMI compliance testing labs uphold these standards. The main categories consist of automotive, MIL-STD, CE Marking, and IEC standards.

Automotive testing has become more complex as the automotive industry moves forward with “smart” and autonomous vehicles. It is more important than ever to test automobiles for electrical, radiated, and magnetic interference. The goal is to test the components in order to eliminate EMI (electromagnetic interference) in automotive vehicles.

Military standard (MIL-STD) is used to ensure products meet certain requirements for the U.S. Department of Defense. The five types of defense standards include the manufacturing process, interface, design criteria, test method, and standard practices. Abiding by these standards allows for uniform engineering and technical demands unique to military requirements.

CE marking is used to indicate that a product meets the European Union's (EU) standards for health, safety, and environmental protection. The CE mark is a requirement for the distribution of a variety of products in the EU. Avalon's EMC/EMI compliance testing will help you meet the safety requirements to receive CE marking, which is not a standard, but rather a legal requirement of the EU.

The International Electrotechnical Commission (IEC) is the leading organization for preparing and publishing international standards for "electrotechnology" (electrical, electronic, and related technologies). Our EMC and EMI compliance testing labs use these standards to ensure the precise safety and performance of all of the electrical equipment that we test.

Browse Avalon's wide variety of test equipment by required standards or categories and Test With Confidence®.

Read More

Read Less

3 Items in Grid 4 Items in Grid List

EM Test ESD NX30 ESD Simulator/Gun

The EM Test ESD NX30 is an ESD tester to simulate ESD pulses at higher voltages up to 30 kV in both air and contact discharge mode. It satisfies requirements exceeding the EN/IEC 61000-4-2 test levels and complies with automotive test applications.

Fischer F-52 Current Monitor Probe

Fischer F-52 Current Monitor Probe 10kHz – 500MHz

Teseq CBA 1G-070B Broadband Power Amplifier

New, high power density, design has allowed us to produce a 70 W 1 MHz to 1 GHz amplifier in a compact 3U package. With a minimum of 55 W of linear power this amplifier is ideal for RF immunity testing in a GTEM and for 3V/m testing with a wide range of available antenna.

Teseq NSG 4060 Low Frequency Immunity Test System

The Teseq NSG 4060 is an EMC immunity test system for the frequency range of 15 Hz - 150 kHz

EM Test CN 200N1 Audio Transformer Assembly

For LF Conducted Immunity Testing

Haefely ONYX 16 ESD Simulator/Gun

Haefely ONYX 16 ESD Simulator/Gun, 16kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 16kV guns on the market.

Haefely ONYX 30 ESD Simulator/Gun

The Haefely ONYX 30 ESD Simulator/Gun, 30kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 30kV guns on the market. Test with confidence®.

EM Test CWS 500N4 Simulator for Conducted, Common-Mode Disturbances

EM Test CWS 500N4Simulator for conducted, common-mode disturbances, as per IEC 61000-4-16, IEC 61000-4-19 Annex C, 0Hz (DC) to 165kHz

EM Test CWS 500N1 Continuous Wave Simulator

EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6

Com-Power RS101 Loop Antenna Set

Antenna Set for MIL-STD-461 RS101 Calibration & Test

Keysight N9020B MXA Signal Analyzer

Multi-touch, 10 Hz–50 GHz

Keysight/Agilent N9020A MXA Signal Analyzer

10 Hz to 3.6, 8.4, 13.6, or 26.5 GHz

Keysight N9010B EXA Signal Analyzer

Multi-touch, 10 Hz–44 GHz

Com-Power AH-118 Double Ridge Horn Antenna

Offers excellent performance over the frequency range of 700MHz to 18GHz.

IFI EFG-3B E-Field Generating Antenna

10 kHz – 220 MHz, 2000 watts

Teseq NSG 437 Automotive ESD Simulator/Gun

Teseq NSG 437-AUTOMOTIVE ESD Simulator/Gun, 30kV includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual

ETS Lindgren HI-6053 Electric Field Probe

ETS-Lindgren's Model HI-6053 is a battery-operated electric field probe that provides broadband frequency coverage and wide dynamic range that satisfies the demands of most test requirements.

IFI SCCX800 Solid State Amplifier

10 kHz–220 MHz, 800 W

IFI T188-500 TWT Microwave Power Amplifier

Rent IFI's T188 Series High Power TWT Microwave Power Amplifier T188-500 from Avalon Test Equipment. CW TWT 7.5GHz to 18GHz, 500W

IFI SMCC500 Solid State Amplifier

200 MHz to 1000 MHz, 500 W

Keysight/Agilent E8257C PSG Analog Signal Generator

Up to 40GHz. Low phase noise, high power, and analog modulation. Modular architecture.

Teseq NSG 435 ESD Simulator/Gun

16.5kV Air, 9kV Contact

Filter by:

Clear All
Close