Close
You have no items in your shopping cart.

Rohde & Schwarz SMBV100A Vector Signal Generator

Manufacturer part number: SMBV100A
9 kHz–3.2 GHz/6 GHz
PURCHASE
AvailableQTYPrice
New:   1
+ -
$0.00
Used:   1
+ -
$39,250.00Configurations
X

Available Configurations

VECTOR SIGNAL GENERATOR 9 KHZ - 6 GHZ
30016507
Include Options
B106: Frequency Range, 9 kHz - 6 GHz
B1: Reference Oscillator OCXO
B92: Hard Disk (removable)
K22: Pulse Modulator
B10: Baseboard Gen. w/ Dig. Mod. and ARM
B55: EDR Option
K23: Pulse Generator
K54: IEEE 802.11n
K55: EUTRA/LTE
K62: Additive White Gaussian Noise (AWGN)
K6: Pulse Measurements
$39250
OPTIONS
NamePurchase
B103: Frequency Range, 9 kHz - 3.2 GHz$19,910.00
B106: Frequency Range, 9 kHz - 6 GHz$0.00
B1: Reference Oscillator OCXO$0.00
B1H: Reference Oscillator OCXO High Performance$0.00
B10F: Baseband Gen. for GNSS, Hi Dynam., Dig. Mod.$11,650.00
B92: Hard Disk (removable)$0.00
B10: Baseboard Gen. w/ Dig. Mod. and ARM$11,650.00
B55: EDR Option$0.00
K6: Pulse Measurements$0.00
K22: Pulse Modulator$3,440.00
K23: Pulse Generator$2,060.00
K44: GPS Internal Digital Standard$14,950.00
K54: IEEE 802.11n$0.00
K55: EUTRA/LTE$0.00
K62: Additive White Gaussian Noise (AWGN)$3,580.00
K65: Assisted GPS$0.00
K91: GNSS Extension to 12 Satellites$0.00
K92: GNSS Enhanced$0.00
K93: GPS P-Code$0.00
K96: GNSS Extension to 24 Satellites$0.00
K101: GNSS Ext.: Obscuration + Automatic Multipath$0.00
K102: GNSS Extension for Antenna Pattern$0.00
K103: GNSS Ext.: Spinning and Attitude Simulation$0.00
K522: RF Bandwidth Extension to 160 MHz$4,810.00

The R&S® SMBV100A offers excellent RF performance along with very high output levels and short setting times. At the same time, the R&S® SMBV100A can be equipped with an internal baseband generator to allow the generation of a number of digital standards (e.g.LTE, LTE-Advanced, IEEE802.11ac, GNSS). The wide frequency range from 9 kHz to 6 GHz covers all of the important bands for digital modulation.

Features:

  • Frequency options from 9 kHz to 3.2 GHz/6 GHz
  • Optional baseband generator with realtime coder and arbitrary waveform generator for maximum flexibility
  • Optional ARB-only baseband generators as cost-saving alternatives
  • Support of 3GPP LTE FDD and TDD, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, WLAN, WiMAX™ and all other important digital standards
  • Fully-fledged GNSS simulator with GPS, Glonass, Galileo, BeiDou, and QZSS/SBAS
  • Special package for cost-efficient GNSS Production Tester
  • RF bandwidth of up to 160 MHz with internal baseband generator
  • I/Q modulator with 528 MHz RF bandwidth
  • Optimized for high production throughput
  • Prepared for aerospace and defense applications
  • Low cost of ownership due to simple service concept

Range  

  • R&S®SMBV-B103
    • CW Mode: 9 kHz to 3.2 GHz
    • I/Q Mode: 1 MHz to 3.2 GHz
  • R&S®SMBV-B106
    • CW Mode: 9 kHz to 6 GHz
    • I/Q Mode: 1 MHz to 6 GHz

Setting Time

  • SCPI Mode, ALC State on, CW Mode
  • SCPI Mode, ALC State on, I/Q Mode
  • SCPI Mode, ALC State Table
  • SCPI Mode, ALC State S&H
  • List Mode
  • Power Cord
  • Software and manuals on USB
  • Removable hard drive

Description

The R&S® SMBV100A offers excellent RF performance along with very high output levels and short setting times. At the same time, the R&S® SMBV100A can be equipped with an internal baseband generator to allow the generation of a number of digital standards (e.g.LTE, LTE-Advanced, IEEE802.11ac, GNSS). The wide frequency range from 9 kHz to 6 GHz covers all of the important bands for digital modulation.

Features:

  • Frequency options from 9 kHz to 3.2 GHz/6 GHz
  • Optional baseband generator with realtime coder and arbitrary waveform generator for maximum flexibility
  • Optional ARB-only baseband generators as cost-saving alternatives
  • Support of 3GPP LTE FDD and TDD, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, WLAN, WiMAX™ and all other important digital standards
  • Fully-fledged GNSS simulator with GPS, Glonass, Galileo, BeiDou, and QZSS/SBAS
  • Special package for cost-efficient GNSS Production Tester
  • RF bandwidth of up to 160 MHz with internal baseband generator
  • I/Q modulator with 528 MHz RF bandwidth
  • Optimized for high production throughput
  • Prepared for aerospace and defense applications
  • Low cost of ownership due to simple service concept