Close
You have no items in your shopping cart.

RTCA/DO-160 Section 25

RTCA DO-160 Section 25 focuses on electrostatic discharge (ESD). This type of ESD testing relates to airborne equipment that will be exposed to electrical discharges from human contact. DO-160 Section 25 applies to all equipment that can be accessed during typical operation or maintenance of aircraft. Examples of components or circumstances that can produce ESD include low relative humidity, vinyl seats, carpets, and plastic structures within an aircraft.

The purpose of DO-160 Section 25 is to establish the immunity of the equipment by verifying its ability to operate properly after being exposed to an air discharged electrostatic pulse. Testing is performed by generating ESD pulses at a test level of 15,000 volts in specific human contact locations on the EUT. Ten pulses will be generated in each specific area in both positive and negative polarities to determine the EUT's immunity.

The requirements specified in DO-160 Section 25 standard testing meet FAA and international regulations for electrical equipment installed on commercial aircraft.

Avalon Test Equipment carries a variety of ESD equipment from top manufacturers (Teseq, EM Test, Haefely, and more) to meet DO-160 Section 25 requirements. Rent from Avalon and Test With Confidence®.

Read More

Read Less

3 Items in Grid 4 Items in Grid List

EM Test ESD NX30 ESD Simulator/Gun

The EM Test ESD NX30 is an ESD tester to simulate ESD pulses at higher voltages up to 30 kV in both air and contact discharge mode. It satisfies requirements exceeding the EN/IEC 61000-4-2 test levels and complies with automotive test applications.

EMC Partner ESD3000 Handheld ESD Generator

EMC Partner ESD3000 handheld ESD generator/tester with modular discharge circuits up to 30KV.

Haefely ONYX 16 ESD Simulator/Gun

Haefely ONYX 16 ESD Simulator/Gun, 16kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 16kV guns on the market.

Haefely ONYX 30 ESD Simulator/Gun

The Haefely ONYX 30 ESD Simulator/Gun, 30kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 30kV guns on the market. Test with confidence®.

M Precision MiniZap-15 ESD Simulator

The MPL MZ15 ESD Simulator Gun for IEC 1000-4-2 compliance testing. Includes 150pF/330 ohm discharge network, TPA-1, TPA-2, TPC-2A discharge tips, battery charger, carrying case.

Teseq MD 102A ESD Pulse Measurement Target for IEC/EN 61000-4-2

ESD measurement target conforming to IEC/EN 61000-4-2

Teseq MD 103 ESD Pulse Calibration Set

Target for precise ESD pulse measurements, very small insertion loss variation, precise gold plated construction

Teseq NSG 434 ESD Simulator/Gun

8.8kV Air, 6.6kV Contact

Teseq NSG 435 ESD Simulator/Gun

16.5kV Air, 9kV Contact

Teseq NSG 437 Automotive ESD Simulator/Gun

Teseq NSG 437-AUTOMOTIVE ESD Simulator/Gun, 30kV includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual

Teseq NSG 437 ESD Simulator/Gun

Teseq NSG 437 ESD Simulator/Gun, 30kV Includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual

Teseq NSG 438 ESD Simulator/Gun

30kV ESD Simulator/Gun with built in charge remover