Close
You have no items in your shopping cart.

Rohde & Schwarz ESPC EMI Test Receiver

Manufacturer part number: ESPC
$0.00
excluding shipping
150KHz-1GHz EMI Test Receiver
+ -
X

Available Configurations

EMI TEST RECEIVER WITH PC SOFTWARE, 50 KHZ TO 1 GH
30020921
$0

The Rohde & Schwarz EMI Precertification Test Receiver ESPC has been derived from various Rohde & Schwarz full-compliance receiver models and thus opens up versatile applications in the field of EMI precompliance. It is a budget-priced solution for emission tests at all stages of development and production of electrical products. With a view to obtaining the CE conformity mark, this test received will be used wherever EMI tests become necessary prior to acceptance testing in order to minimize the risks involved and the time take for full-compliance tests. 

Featuring built-in preselection, ESPC is able to perform accurate interference measurements with pulse repetition frequencies (PRF) to as low as 10 Hz in line with CISPR 16-1. An overload detection system for the complete receiver signal path from the input through to the IF stages warns the user in case of erroneous measurements. 

Preselection and overload protection ensure reliable and reproducible measurements which is a particularly important aspect in automatic test runs. Incorrect EMI diagnostics at an early production stage cause high costs, delay the product launch and hence put at risk the return on high investment. If a product does not pass the compliance test for whatever reason, it is all the more important that the test receiver used for post-qualification is absolutely reliable so that rework can be performed within the shortest possible time and the compliance test repeated as soon as possible. 

Features:

  • Large frequency range from 150 kHz to 1000 MHz
  • Parallel detectors for average, peak and quasi-peak reading
  • Fast synthesizer: frequency resolution 10 Hz and 100 Hz
  • Automatic level calibration
  • Frequency Range: Lower Limit: 150 kHz; Upper Limit: 1000 MHz
  • Display: 8-digit LCD with backlighting, can be switched off
  • Frequency Error: <3 x 10−6, after 30 min warmup
  • RF Attenuator: 0 to 70 dB, 10-dB steps
  • Rated Temperature Range: 5° C to  45° C
  • Operating Temperature Range: −10° C to 55° C (no condensation allowed)
  • Storage Temperature Range: -25° C to 70° C
  • Mechanical Resistance: Shock-tested to MIL-STD-810D (shock spectrum 40 g), vibration-tested to MIL-T-28800D, Class 5
  • EMC: Satisfies EMC directives of EU (89/336/EEC) and German EMC legislation
  • Selftest: At a keystroke, detects faults down to module level
  • AC Supply: (100/120/240) V ±10%, 230 V; +6/−10%, 80 VA, 47 Hz to 420 Hz, safety class I to VDE 0411 (IEC 348)
  • Batter (External): 11 V to 33 V
  • Dimensions: 435 mm x 236 mm x 350 mm
  • Weight: 17 kg
Description

The Rohde & Schwarz EMI Precertification Test Receiver ESPC has been derived from various Rohde & Schwarz full-compliance receiver models and thus opens up versatile applications in the field of EMI precompliance. It is a budget-priced solution for emission tests at all stages of development and production of electrical products. With a view to obtaining the CE conformity mark, this test received will be used wherever EMI tests become necessary prior to acceptance testing in order to minimize the risks involved and the time take for full-compliance tests. 

Featuring built-in preselection, ESPC is able to perform accurate interference measurements with pulse repetition frequencies (PRF) to as low as 10 Hz in line with CISPR 16-1. An overload detection system for the complete receiver signal path from the input through to the IF stages warns the user in case of erroneous measurements. 

Preselection and overload protection ensure reliable and reproducible measurements which is a particularly important aspect in automatic test runs. Incorrect EMI diagnostics at an early production stage cause high costs, delay the product launch and hence put at risk the return on high investment. If a product does not pass the compliance test for whatever reason, it is all the more important that the test receiver used for post-qualification is absolutely reliable so that rework can be performed within the shortest possible time and the compliance test repeated as soon as possible. 

Features:

  • Large frequency range from 150 kHz to 1000 MHz
  • Parallel detectors for average, peak and quasi-peak reading
  • Fast synthesizer: frequency resolution 10 Hz and 100 Hz
  • Automatic level calibration