RF Conducted Test Equipment is used to efficiently test immunity along power and data lines up to 1GHz. They are able to measure the DUT's (device under test) reaction to power fluctuations so engineers can accurately evaluate the device's susceptibility when exposed to a drop or surge in conducted energy. Test standard IEC 61000-4-16 establishes all the requirements when testing the susceptibility of a device to possible conducted energy drops and surges. The most common bandwidths when testing range between 10 kHz and 400 MHz.
Rent crucial RF conducted test equipment from Avalon Test Equipment. With a variety of equipment from top manufacturers (EM Test, Teseq, and more), Avalon can provide top quality equipment to meet your specific requirements so you can Test With Confidence®.
Wide frequency range 10 kHz - 400 MHz High power handling (up to 1 kW) Ideal for automotive BCI testing e.g. ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and manufacture‘s requirements Meets IEC/EN 61000-4-6 Replacement for CIP 36A & 37A as specified in Defence Standard 59-41
As specified in IEC/EN 61000-4-6, the KEMZ 801 EM Clamp utilizes a combination of inductive and capacitive coupling and can be used on almost any cable
The Teseq MD 4070 Monitoring Device 10 kHz to 400 (600) MHz is suitable for BCI testing per ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 CS114 and various automotive standards
Impedance stabilization networks (ISN, or with CISPR 16-1-2 called AAN: asymmetric artificial network) are defined for measuring of conducted common mode disturbances at information technology equipment (ITE) as required in CISPR 22 and CISPR 32. The ISN is placed between the equipment under test (EUT) and auxiliary equipment (AE) or load which are necessary for the operation of the EUT.
The absorbing clamp CLA-150 was designed for EMC emissions measurement of from electrical instruments via their connecting leads. It has a 32-mm cable aperture.
Used to couple fast transient pulses to I/O lines as required in different national and international standards and car manufacturer specifications for automotive testing.