Close
You have no items in your shopping cart.

PAL-010 Preamplifier

Manufacturer part number: PAL-010
Com-Power PAL-010 Preamplifier
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The Com-Power model PAL-010 Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing.. It has a frequency range of 100Hz to 30MHz and gain of 28dB. It amplifies the signals that were previously hidden below the receiver noise floor of the EMI receiver so that it can be seen and measured. The PAL-010 has a gain variation of ±2.5dB for the entire frequency range to reduce measurement errors. It can be powered by the included rechargeable NimH batteries when an external power source is not available.

Features

  • Broadband - 100 Hz - 30 MHz
  • High Gain: 28 dB
  • Flat Response: ± 2 dB
  • Frequency: 100 Hz - 30 MHz
  • Gain: 28 dB
  • Flatness: ± 2. dB
  • Impedance: 50 Ω
  • Max. DC Input: 10 VDC, 2 dBm
  • Connector Type: BNC (f)
  • Input Power: 12 VDC, 500 mA
  • Batter Pack: Two 6 V, 0.7 A NimH
  • Dimensions: 7.5 x 5 x 3 Inch (9 x 13 x 7.6 cm)
  • Weight: 3.3 lbs. (1.5 kg)
  • Calibration Data
  • Manual
  • Battery pack, qty 2
  • AC adaptor/charger
  • FCC
Description

The Com-Power model PAL-010 Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing.. It has a frequency range of 100Hz to 30MHz and gain of 28dB. It amplifies the signals that were previously hidden below the receiver noise floor of the EMI receiver so that it can be seen and measured. The PAL-010 has a gain variation of ±2.5dB for the entire frequency range to reduce measurement errors. It can be powered by the included rechargeable NimH batteries when an external power source is not available.

Features

  • Broadband - 100 Hz - 30 MHz
  • High Gain: 28 dB
  • Flat Response: ± 2 dB
Product tags