Close
You have no items in your shopping cart.

Olympus IPLEX FX Industrial Videoscope

Sorry - this product is no longer available

Manufacturer part number: IPLEX-FX
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The main component of the IPLEX FX base unit chassis is magnesium — renowned for its strength and light weight. A typical material used for industrial environment equipment, magnesium was chosen to provide the impact resistance and solid base that withstands the knocks and bumps that commonly occur to industrial videoscopes. In addition to a crush-resistant chassis each corner is protected by rubber bumpers, further softening a drop and maximizing product reliability while reducing potential for damage. The IPLEX FX survived the repetitive 4-foot drop test for compliance to MIL-STD 810F.

The IPLEX FX uses Stereo Measurement technology for accurate, three-dimensional defect measurement at any target angle. With the addition of Olympus’ unique Multi and Offset Measurement modes, the IPLEX FX offers a more intuitive measurement environment with eight different modes for accurate evaluation of most inspection targets. Multi Measurement mode is a quick two-point defect identification technique that simultaneously calculates point-to-line, area and distance results. Stereo Measurement tip adapters are available in direct and side view models for all three insertion tube diameters.

Features

  • True Portability — Compact, Lightweight, Battery-powered
  • Temperature Resistance
  • Resistance to Harsh Environments
  • Daylight-view High Resolution LCD Monitor
  • Optimized Images with Interchangeable LED Tip Adapters
  • New LED Illumination with SmartTip™ Optical Adapters
  • Measurement Accuracy
  • Interchangeable Scopes
  • Foreign Object Retrieval
  • ImageNotepad™ for Extended Image Annotation
  • Inspection Recording Options
  • IPLEX Viewer Plus Software
  • SmartTip™ Automatic Recognition Technology
  • Quick-access Hot Buttons
  • One-handed Scope Control and Interface
  • Dual Recording Button

Available Scopes

  • IV8420
  • IV8435
  • IV8620
  • IV8635
  • IV8635X1
  • IV8650
  • IV8675
  • IV8675X2
  • IV86120
  • IV86180

Dimensions: 9.8 in x 6.3 in x 11.2 in (250 mm x 160 mm x 285 mm)

Weight: 10.8 lb (4.9 kg), including battery.

Construction: Cast magnesium alloy chassis

Hardware Connectors

  • Video Output: S-Video, Composite BNC (NTSC/PAL-region specific).
  • Audio Input: External microphone, 3.5 mm mono jack
  • Auxiliary Connector: Two-way communication connector for future interface development.
  • USB: One USB connector for direct flash drive recording and PC communication.

LCD Specifications

  • LCD Panel: 6.5-inch daylight-view LCD, low reflection type
  • LCD Resolution: VGA High Resolution 640 x 480
  • LCD Controls: Dedicated LCD power, brightness control, 180º image rotate, TITLE and NOTE buttons located on LCD panel.
  • LCD Mounts::A standard 1/4”–20 mount on base.

Power Supply

  • Internal Battery:
    • Voltage: 14.8 V nominal, 11.5 V to 16.8 V
    • Operating Time: 150 minutes (min)
  • AC Power:
    • Input Voltage: 100 V to 240 V
    • Supply Frequency: 50/60 Hz (with supplied AC adapter)
Description

The main component of the IPLEX FX base unit chassis is magnesium — renowned for its strength and light weight. A typical material used for industrial environment equipment, magnesium was chosen to provide the impact resistance and solid base that withstands the knocks and bumps that commonly occur to industrial videoscopes. In addition to a crush-resistant chassis each corner is protected by rubber bumpers, further softening a drop and maximizing product reliability while reducing potential for damage. The IPLEX FX survived the repetitive 4-foot drop test for compliance to MIL-STD 810F.

The IPLEX FX uses Stereo Measurement technology for accurate, three-dimensional defect measurement at any target angle. With the addition of Olympus’ unique Multi and Offset Measurement modes, the IPLEX FX offers a more intuitive measurement environment with eight different modes for accurate evaluation of most inspection targets. Multi Measurement mode is a quick two-point defect identification technique that simultaneously calculates point-to-line, area and distance results. Stereo Measurement tip adapters are available in direct and side view models for all three insertion tube diameters.

Features

  • True Portability — Compact, Lightweight, Battery-powered
  • Temperature Resistance
  • Resistance to Harsh Environments
  • Daylight-view High Resolution LCD Monitor
  • Optimized Images with Interchangeable LED Tip Adapters
  • New LED Illumination with SmartTip™ Optical Adapters
  • Measurement Accuracy
  • Interchangeable Scopes
  • Foreign Object Retrieval
  • ImageNotepad™ for Extended Image Annotation
  • Inspection Recording Options
  • IPLEX Viewer Plus Software
  • SmartTip™ Automatic Recognition Technology
  • Quick-access Hot Buttons
  • One-handed Scope Control and Interface
  • Dual Recording Button

Available Scopes

  • IV8420
  • IV8435
  • IV8620
  • IV8635
  • IV8635X1
  • IV8650
  • IV8675
  • IV8675X2
  • IV86120
  • IV86180
Product tags