Close
You have no items in your shopping cart.

M Precision MiniZap-15 ESD Simulator

Manufacturer part number: MINIZAP-15
The MPL MZ15 ESD Simulator Gun for IEC 1000-4-2 compliance testing. Includes 150pF/330 ohm discharge network, TPA-1, TPA-2, TPC-2A discharge tips, battery charger, carrying case.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

M Precision Laboratories MiniZap-15 ESD Simulator 

The MiniZap-15 ESD Simulator Gun is lightweight, handheld, easy-to-use, and able to withstand long-term operation in rugged environments. The MiniZap-15 Simulator supports testing to the international standard IEC/EN 61000-4-2. And by simply interchanging plug-in tips, you can test to additional ESD standards, as well as do “reality checks” that indicate product performance in sensitive environments. The MiniZap tester does not use a voltage multiplier, and won’t introduce testing errors and uncertainties due to streams of artificial, high-level ESD multiples generated by a human discharge or by other ESD simulators.

ESD is the most common cause of failure in computer-based equipment, and susceptibilities often occur during installation and networking. The diagnosis and remedy for ESD failures typically require test procedures developed in R&D, but implemented by QC, manufacturing, and field service.

Practical and reliable, the MPL MiniZap ESD simulator and options are designed specifically for demanding applications such as these. It generates ESD simulation pulses that are real world, repeatable and correlatable – mandatory performance.

Features: 

  • Handheld, portable and self-contained ESD simulator
  • Meets requirements of IEC 61000-4-2 and ANSI C63.16
  • Contact mode (8kV) and air discharge ESD testing (15kV)
  • Generates real-world, repeatable ESD pulses
  • E and H Field diagnostics
  • Vertical and horizontal coupling planes for indirect ESD testing
  • Built-in safety features
  • Field-configurable

  • Discharge Tips
  • Battery Charger
  • Carrying Case
  • Discharge Network
  • Voltage Range: ±0.5 to >8 kV, Contact Mode; ±0.5 to 15 kV, Air Discharge
  • Air Discharge: TRUE-ESD® (
  • Contact Mode: 0.7 - 1.0 ns risetime per IEC plus FR/CI™ std
  • RC Networks: 150 pF/330 ohm standard (other RC networks available)
  • Lock On: Standard (with safety interlock)
  • Rep Rate: Single shot as well as 1/sec and 20/sec repetitive operation
  • HV Display: Digital LCD display measures actual HV at the tip with 10V resolution, ~3% accuracy
  • Ground Connect Warning: LED indicates ground cable not connected to tester
  • Power: Operates either from 120 VAC, 50/60 Hz or 4 NiCd batteries with LED charge status indicator. (220/240 VAC, 50/60 Hz and European plugs optional)
  • Size: 10" x 2.5" x 3.2" (25.4cm x 8.9cm x 8.1cm)
  • Weight: 29 oz (822 gm) nominal, plus case and accessories
  • IEC 61000-4-2
  • MIL-STD-883
Description

M Precision Laboratories MiniZap-15 ESD Simulator 

The MiniZap-15 ESD Simulator Gun is lightweight, handheld, easy-to-use, and able to withstand long-term operation in rugged environments. The MiniZap-15 Simulator supports testing to the international standard IEC/EN 61000-4-2. And by simply interchanging plug-in tips, you can test to additional ESD standards, as well as do “reality checks” that indicate product performance in sensitive environments. The MiniZap tester does not use a voltage multiplier, and won’t introduce testing errors and uncertainties due to streams of artificial, high-level ESD multiples generated by a human discharge or by other ESD simulators.

ESD is the most common cause of failure in computer-based equipment, and susceptibilities often occur during installation and networking. The diagnosis and remedy for ESD failures typically require test procedures developed in R&D, but implemented by QC, manufacturing, and field service.

Practical and reliable, the MPL MiniZap ESD simulator and options are designed specifically for demanding applications such as these. It generates ESD simulation pulses that are real world, repeatable and correlatable – mandatory performance.

Features: 

  • Handheld, portable and self-contained ESD simulator
  • Meets requirements of IEC 61000-4-2 and ANSI C63.16
  • Contact mode (8kV) and air discharge ESD testing (15kV)
  • Generates real-world, repeatable ESD pulses
  • E and H Field diagnostics
  • Vertical and horizontal coupling planes for indirect ESD testing
  • Built-in safety features
  • Field-configurable