Close
You have no items in your shopping cart.

IFI T2618-50 TWT Microwave Power Amplifier

Manufacturer part number: T2618-50
18–26.5 GHz, 50 W
PURCHASE
AvailableQTYPrice
New:   1
+ -
$165,000.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The IFI T2618 Series Medium to High Power TWT Amplifiers are top-performing with field-proven reliability. TIt has a power level of 50 watts and an 18.0GHz-26.5GHz frequency range. This amplifier includes a full complement of RF and hardware protection systems including high VSWR, over-current, and voltage protection. The redundant thermal and airflow sensors prevent the TWT from overheating. It features modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities. The T2618-50 is designed for simplicity with a backlit LCD screen that shows forward/reverse power indication, system status, and self-diagnostic information. For computer automation, both an RS-232 and IEEE-488 interface are included.

Features: 

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232 & Ethernet Remote available
  • Solid State Power Supply
  • Frequency Range: As Specified in Model Table
  • Rated Output Power: As Specified in Model Table
  • Gain @ Rated Power: As Specified in Model Table
  • Prime Power: As Required for Customer (Some are listed below)
  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type K Female, unless specified otherwise
  • RF Output Connector: WR42
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0° to 50° C
  • Non-operating Temp/Altitude: -40° to 70° C (50,000 feet max)
  • Humidity: 95% without condensation
  • Operating Altitude: 10,000 feet
  • Cooling System: Air cooled, self-contained
  • Modulation: All types, AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Cabinet Integrated as needed
  • Spurious Outputs:

Standard Prime Powers:

  • 100, 115, 120 VAC ±10% 50/60 Hz, single phase
  • 200, 220, 230, 240VAC ±10% 50/60 Hz, single phase
  • 100/200VAC,115/208 or 200/220/230/240VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.




Description

The IFI T2618 Series Medium to High Power TWT Amplifiers are top-performing with field-proven reliability. TIt has a power level of 50 watts and an 18.0GHz-26.5GHz frequency range. This amplifier includes a full complement of RF and hardware protection systems including high VSWR, over-current, and voltage protection. The redundant thermal and airflow sensors prevent the TWT from overheating. It features modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities. The T2618-50 is designed for simplicity with a backlit LCD screen that shows forward/reverse power indication, system status, and self-diagnostic information. For computer automation, both an RS-232 and IEEE-488 interface are included.

Features: 

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232 & Ethernet Remote available
  • Solid State Power Supply