Close
You have no items in your shopping cart.

IFI GT825-500 TWT Microwave Power Amplifier

2.5–8 GHz, 500W
PURCHASE
AvailableQTYPrice
New:   1
+ -
$139,200.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

IFI GT825-500 TWT Microwave Power Amplifiers; 2.5-8.0 GHz, 500W

Instruments for Industry, The GT825-500 Amplifier provides outstanding RF performance. A mature design that incorporates the latest features with respect to control and monitoring. These amplifiers are “State of the Art”; have field-proven reliability and unsurpassed performance as the best in the industry.

Operation safety and ease of use are paramount in IFI product designs. The IFI GT825-500 Series include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating. In addition, the GT825-500 series includes a state-of-the-art interface that is sophisticated, comprehensive, but yet simple to use.

Features:

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232
  • Solid State Power Supply
  • Frequency Range (GHz): 2.5-8.0 GHz
  • Rated Power (watts min.): 500W, 400W
  • Input/Output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type SC or 716 Female up to 8 GHz, 8 – 12 GHz is WR90, 12 – 18 GHz is WR62, 7.5 – 18 GHz is WRD750, 6.5 – 18 GHz is WRD650. Other waveguides available by request or specification (see Option 117)
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Pulse Input: BNC Female Front Panel {TTL into 50 ohms standard} consult factory for special requirements
  • Pulse Width Range: Up to CW
  • PRF Range: Up to 100 kHz Standard, Higher PRF ranges available consult factory
  • Duty Cycle: Up to CW (Higher PRF ranges subject to TWT specification)
  • Rise & Fall Time: 25 nsec nominal; 40 nsec maximum
  • Pulse to Pulse Jitter: +/- 5 nsec maximum
  • Pulse Width Jitter (Distortion: +/- 5 nsec maximum
  • Pulse Recovery Time: 150 nsec maximum
  • Pulse Delay: 250 nsec maximum / 180 nsec typical
  • Pulse Droop: 0.5 dB/100 usecs, 0.1 dB/10 usec
  • Power Output Stability: 0.2 dB Pulse to Pulse at constant drive level & PRF
  • Pulse On/Off Ratio: 80 dB
  • Phase Stability Pulse to Pulse: +/-1 degree nominal
  • Temperature: 0º to 50º C operating, -40º to 70º C non-operating
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet operating, 50,000 non-operating
  • Cooling System: Air-cooled, self-contained
  • Modulation: All types, AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table
  • Spurious Outputs:
Description

IFI GT825-500 TWT Microwave Power Amplifiers; 2.5-8.0 GHz, 500W

Instruments for Industry, The GT825-500 Amplifier provides outstanding RF performance. A mature design that incorporates the latest features with respect to control and monitoring. These amplifiers are “State of the Art”; have field-proven reliability and unsurpassed performance as the best in the industry.

Operation safety and ease of use are paramount in IFI product designs. The IFI GT825-500 Series include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating. In addition, the GT825-500 series includes a state-of-the-art interface that is sophisticated, comprehensive, but yet simple to use.

Features:

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232
  • Solid State Power Supply