Narda STS-AMS-8061-FREQUENCY SELECTIVE AREA MONITOR

Manufacturer part number: 8061/00

The Selective Area Monitor AMS-8061 is always used where electromagnetic pollution needs to be continuously assessed by long-term observation.

PURCHASE

Available	QTY	Price
New:	Qty: + -
Used:	Qty: + -		Configurations

Available Configurations

Overview
Specifications
Included Accessories
Documentation
Video

The AMS Series

Its frequency selective application is the optimum solution for technical superiority from a tight budget. Narda EMF Monitors can do more than just record and store measurement values at a specific location. The AMS-8061 recognizes which frequency bands and services are responsible for a particular radiation. For example, if several antennas are installed at one location. It is possible to distinguish between the various mobile services (GSM, UMTS, LTE) as well as between FM TV transmitters. By the help of the built in spectrum analyzer it is possible to determine for each individual EMF source whether the corresponding emission limit values are being adhered to, in addition to evaluating the effects on the environment. Basically, this feature makes it quick and easy to determine who is the offending emitter/carrier

Highlights

Monitoring of up to 20 individually programmable frequency bands
ITU-T K.83 compliant
Internal modem for wireless transmission
USB/Ethernet data transmission and integrated 4G modem
Autonomous power supply through solar cells
IP55 rated
PC software with alarm functions
Includes SD memory card, temperature/humidity sensor, and GPS sensor

Product Specifications

Frequency range: 100 kHz to 6 GHz (in accordance with antenna specifications)
User-programmable frequency bands: Up to 20, individual start-stop frequency settings
Sensor type: Triaxial, isotropic antenna system
Sensor dimensions: 120 mm
Sensor RF connection: 50 Ohm, N-male
Sensor control: Multi-pin connector
Measurement range: 0.01 to 200 V/m or 100 µA/m to 7 A/m (depending on antenna specifications)
Dynamic range: > 60 dB in all settings of the attenuator
Sensitivity: 0.01 V/m or 100 µA/m (depending on antenna specifications)
Overload: 435 V/m or 20 A/m (depending on antenna specifications)
Resolution: 0.01 V/m or 100 µA/m (depending on antenna specifications)
Linearity: ±2 dB
Frequency response (flatness): ±3 dB
Overall anisotropy (EN50383): < 2.5 dB to 3 GHz; < 3.5 dB to 6 GHz
Out of band attenuation: > 50 dB (depending on settings)
Rejection: > 20 dB
Reading rate: Up to 200 ms (depending on settings)
Measuring parameters: Settable bands and automatic configuration (RBW, Hold time, Detector Pk-RMS, Attenuator, Zero Span)
Unit: V/m, % of preset limit of each band, A/m
EMF stored values: AVG or RMS, Max value
Average and average time: Arithmetic or RMS; 1 – 15 minutes
Storing rate: 1, 2, 6, 15 minutes
Max logging before overwriting: 18 months @ 6 minutes storing rate; 3 months @ 1 minute storing rate; circular memory
Alarms: SMS and/or data download for field over limit, memory full, open case, temperature, humidity, low battery, sensor failure, main unit failure
Communication: FTP and CSD protocols via internal 4G modem, Ethernet, RS-232, and USB link
Modem: Worldwide LTE, UMTS/HSPA+/GSM/GPRS/EDGE coverage
Data download: FTP: automatic to server; CSD: automatic or manual to PC
SIM card type (not included): Enabled for CSD: Circuit Switched Data service or GPRS or both data communication modes; Enabled for SMS & FTP: required
SMS: SMS to 10 mobile phones (daily report of Max. EMF value, min. battery voltage)
Battery management: Every record includes battery voltage and charge current value
Temperature and humidity sensors: Internal, logged in memory
GPS coordinates: Latitude, longitude
Clock: Internal real-time clock
Firmware upgrade: Remotely upgradable (FTP, CSD), USB, RS-232
Interface: RS-232, Ethernet, and USB
External memory: Micro SD card (not included)

AMS-8061 AREA MONITOR SELECTIVE
AMS-8061/00
	FREQUENCY SELECTIVE AREA MONITOR	8061/00	x
	Base unit only (to be equipped with specific antenna - see below)		x
	AC/DC powered with sealed lead acid battery and solar panel		x
	INCLUDING:		x
	- Modem 4G		x
	- 8061-SW-02 Area Monitor Remote and Control SW		x
	- Certificate of Calibration (including antenna)		x
	- USB cable		x
	- Ethernet cable		x
	- AC/DC power supply and charger 12.0 V (all plugs, 100240 V)		x
	Fiber Glass Mast including Mast, Base, Ballast Bags, Tool Kit		x
	and Solar Panel for battery recharging		x
	Operating Manual		x
	REQUIREMENTS FOR OPERATION:		x
	SIM card (enabled for CSD: Circuit Switched Data service,		x
	or GPRS or both data communication modes)		x

Data sheet

Manual

Description

The AMS Series

Monitoring of up to 20 individually programmable frequency bands
ITU-T K.83 compliant
Internal modem for wireless transmission
USB/Ethernet data transmission and integrated 4G modem
Autonomous power supply through solar cells
IP55 rated
PC software with alarm functions
Includes SD memory card, temperature/humidity sensor, and GPS sensor

Product tags

area monitor (4)
,
rf area monitor (5)
,
narda sts-ams-8061-frequency selective area monito (1)

LOCATIONS