Close
You have no items in your shopping cart.

Fluke 8050A Multimeter

Manufacturer part number: 8050A
$0.00
excluding shipping
Fluke 8050A Multimeter, 4.5 Digits
+ -
X

Available Configurations

DIGITAL MULTIMETER, 4 1 / 2 DIGITS
30004322
Include Options
SEE **01**
INTERNAL BATTERY
$25
DIGITAL MULTIMETER, 4 1 / 2 DIGITS
30004327
$25
DIGITAL MULTIMETER, 4 1 / 2 DIGITS
30004331
$25
DIGITAL MULTIMETER, 4 1 / 2 DIGITS
30004332
$25
DIGITAL MULTIMETER, 4 1 / 2 DIGITS
30004333
$25
DIGITAL MULTIMETER, 4 1 / 2 DIGITS
30004334
$25

The Fluke 8050A is a 4.5 digit bench multimeter. A multimeter is an instrument used to test and measure alternating current (AC) or direct current (DC) voltage, resistance, and electric current. Multimeters combine voltmeters, ammeters, and ohmmeters. Electricians use multimeters to run diagnostics on batteries, switches, components, power sources, and motors.

Features

  • True-rms ac to 50 kHz
  • Conductance function checks high resistance
  • High-power or low-power ohms
  • Five voltage ranges 200 mV to 1000V
  • Extenxive overload protection
  • Functions: DC volts, AC volts (linear and dB), DC current, AC current, resistance, diode test, conductance, relative
  • DC Voltage
    • Input Impedance: 10 MΩ in parallel with
    • Normal Mode Rejection Ratio: >60 dB at 60 hZ or 50 Hz
    • Common Mode Rejection Ratio: >90 dB at dc, 50 Hz or 60 Hz (1 kΩ unbalanced)
    • Common Mode Voltage (Maximum): 500V dc or peak ac
    • Response Time to Rate Accuracy: 1 second maximum
    • Maximum Input: 1000V dc or peak ac continuous (less than 10 seconds duration on both the 200 mV and 2V ranges)
  • AC Volts
    • Resolution: 0.01 dB form 5% of scale to full scale; 0/1 dB from 1-5% of scale, 1dB below 1% of scale
    • Volt-Hz Product: 10^7 max (200V max @ 50 kHz)
    • Extended dB Sensitivity: Typically -72 dB 600Ω Ref) ± 1dB to 10 Khz
    • Extended Frequency Response: Typically -3 dB at 200 kHz
    • Common Mode Rejection Ratio (1 kΩ unbalance): >60 dB at 50 Hz or 60 Hz
    • Crest Factor Range: Waveforms with a Peak/RMS ratio of 1:1 to 3:1 at full scale, increasing down range
    • Input Impedance: 10 MΩ in parallel with
    • Maximum Input Voltage: 750V rms or 1000V peak continuous (less than 10 seconds duration on both the 200 mV and 2V ranges), not to exceed the volt-hertz product of 10^7
    • Response Time: 2 seconds maximum within a range
    • Reference Impedances: Sixteen user-selectable impedance reference levels are provided to reference a 0 dBm, 1 mW level (50Ω, 75Ω, 93Ω, 110Ω, 125Ω, 135Ω, 150Ω, 250Ω, 300Ω, 500Ω, 600Ω, 800Ω, 900Ω, 1000Ω, 1200Ω) and an 8Ω impedance reference level is provided to reference a 0 dBW level
  • Environmental
    • Maximum Common Mode Voltage: 500V dc, or peak ac (low terminal potential with respect to power line ground)
    • Temperature Coefficient:
    • Operating Temperature: 0° C to 50° C (32° F to 122° F)
    • Storage Temperature
      • Without Batteries: -40° C to 70° C (-40° F to 158° F)
      • With Batteries: -40° C to 50° C (-40° F to 122° F)
    • Relative Humidity: Up to 90%, 0° C to 35° C (32° F - 95° F), up to 70%, 35° C to 50° C (95° F - 122° F), except on 2000 kΩ, 20 MΩ and 200 nS ranges where it is up to 80%, 0° C to 35° C (32° F - 95° F)
    • Size: 22 x 6 x 25 cm (8.5 x 2.5 x 10 in)
    • Weight: 1.08 kg (2lbs 6 oz)
Description

The Fluke 8050A is a 4.5 digit bench multimeter. A multimeter is an instrument used to test and measure alternating current (AC) or direct current (DC) voltage, resistance, and electric current. Multimeters combine voltmeters, ammeters, and ohmmeters. Electricians use multimeters to run diagnostics on batteries, switches, components, power sources, and motors.

Features

  • True-rms ac to 50 kHz
  • Conductance function checks high resistance
  • High-power or low-power ohms
  • Five voltage ranges 200 mV to 1000V
  • Extenxive overload protection
Product tags