Close
You have no items in your shopping cart.

Narda FieldMan Basic Set, 0-90GHz (radio free)

Manufacturer part number: 2460/201
FieldMan Basic Set, 0-90GHz (radio free).The Narda Fieldman is a smart solution for EMF measurements, capable of handling frequencies up to 90 GHz. It features a wide measurement range from 0 Hz (DC) to 90 GHz. The device uses a digital probe interface, meaning only the probe needs calibration, not the measuring device itself. Its anti-glare, brilliant colour display with automatic brightness adjustment ensures readability even in poor lighting conditions or intense sunlight. Additionally, the Fieldman includes sensors that measure temperature, air humidity, pressure, and height above ground. It also supports rapid data transmission through various interfaces, making it highly efficient for data handling.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

OPTIONS
NamePurchase
Option: GPS/Range Finder for FieldMan$0.00
Option, Wireless$0.00
Option, Narda-TSX Live Measurement$0.00
EFD-0391: E-FIELD PROBE,100kHz-3GHz$0.00
EFD-1891: E-Field Probe-up to 18GHz$0.00
EFD-5091: E-Field Probe 300MHz-50GHz, Thermo$0.00
HFD-3061: H Field Probe, 300kHz - 30MHz$0.00
HFD-0191: H-Field Probe-27MHz-1GHz$0.00
EFD-0392: E-FIELD PROBE, HiPow-100kHz-3GHz$0.00
EFD-0691: E-Field Probe-100kHz-6GHz$0.00
EFD-6091: E-Field Probe-100MHz-60GHz$0.00
Probe EFD-9091, E-Field,100MHz-90GHz$0.00
EFD-4091: E-Field Probe-2MHz - 40GHz$0.00
EFD-0692: E-Field Probe-600MHz-6GHz$0.00
EFD-1891: E-Field Fast Probe-2MHz - 18GHz$0.00
EAD-5091: FCC 1997 Control, 300kHz-50GHz, E-Field$0.00
ECD-5091: SC 6 2015-Control-300kHz-50GHz, E-Field$0.00
EBD-5091: IEEE 2019 Restricted-3MHz-50GHz, E-Field$0.00
EDD-5091: E-Field Probe, 300kHz-50GHz, ICNIRP 2020$0.00

The Narda FieldMan (NBM Successor) is used to make precision measurements to establish human safety, particularly in workplace environments where high electric or magnetic field strengths are likely to occur. An essential task is to demonstrate compliance with general safety regulations, such as FCC, IEEE, ICNIRP or EMF Directive 2013/35/EU. Examples of measurement environments are:


› Radiocommunication base stations (e.g. IEC / EN 62232)
› Broadcasting systems (e.g. IEC 62577)
› Radar and satellite communications systems
› Induction heating and melting (e.g. EN 50519)
› Household appliances (e.g. IEC / EN 62233)
› Electric welding equipment (e.g. IEC / EN 62822)
› Railway environment (e.g. EN 50500)
› Automotive environment (e.g. IEC 62764)
› Energy supply systems (e.g. IEC / EN 62110)
› Medical electrical equipment (e.g. IEC / EN 60601)
› TEM cells and absorber chambers to demonstrate electromagnetic compatibility (EMC)

Use and benefit

During the development of the FieldMan, special attention was paid to achieving simple, well-structured and fluid operation. The arrangement of many display elements known from smartphones, the self-explanatory symbols and the FieldMan processes, which are perfectly tailored to the measurement tasks, offer maximum ease of use. The large, anti-glare HD color display shows the measured values numerically and graphically with all important additional information in a clear form and is easy to read even in bright sunlight. From simple broadband measurements to sophisticated time signal recording in real time or spectral frequency analysis of low-frequency fields, you have the right operating modes at your disposal.


Measurement results can be commented on by text or voice and can be saved as a screen copy at the push of a button. Built-in sensors record the current environmental conditions as well as the position data and automatically add them to the measurement result. The built-in distance meter (option) shows you the measuring height above the ground, which makes the exact positioning of the measuring device much easier. For a better overview, the measurement results can be assigned to freely definable projects, which is particularly helpful when the measurement locations change frequently. If you want to document your measurement results with photos and videos, the FieldMan smartphone app will help you. For example, the app wirelessly transfers media files created with the smartphone to the project directory on the FieldMan SD memory card. A newly developed, extremely powerful PC software "Narda-TSX" is available for documenting the measurement results, media and other information. It is Narda's new software platform for device configuration, measurement data evaluation and documentation, which in addition to the FieldMan will also support other Narda products in the future.

FieldMan Basic Set (radio free)
Each Set includes:
FieldMan Basic Unit
Hardcase for FieldMan and up to 5 Probes
Power Supply USB-C PD, AU/EU/UK/US Plugs
Shoulder Strap, 1m
Cable, 2x USB-C(M), 3A, 2m
Marking Rings for FieldMan Probes
USB Stick: Manuals and Documents
Quick Start Guide
Safety Instructions

Metrics

  • Electric and Magnetic Fields:

    • Measurement control and result display for various probes and analyzers.
    • Frequency range and level range depend on the probe/analyzer.
  • Probes:

    • Broadband Probes: 100 kHz to 90 GHz (see list of digital broadband probes).
    • Selective Probes: 1 Hz to 400 kHz, B-field (see list of digital selective probes).
    • Probe Model EHP-50F/G: 1 Hz to 400 kHz, E-field and B-field (FFT-Analyzer, see separate datasheet).
    • Probe Model HP-01: 0 Hz to 1 kHz, B-field (Magnetometer/FFT-Analyzer, see separate datasheet).
  • Units:

    • Electric Field Units: V/m, mW/cm², W/m², % of standard (depending on the connected probe).
    • Magnetic Field Units: A/m, Tesla, Gauss, mW/cm², W/m², % of standard (depending on the connected probe).
  • Environmental Measurements:

    • Temperature: Logging of ambient temperature at the time of measurement (-40 °C to +85 °C) in °C or °F.
    • Humidity: Logging of ambient relative humidity at the time of measurement (0% to 100% RH).
    • Air Pressure: Logging of ambient air pressure at the time of measurement (300 to 1100 hPa).
  • Distance (Option):

    • Ultrasonic rangefinder on the bottom side measures the distance to ground or to an object (0.25 m to 4 m) in m, ft, in, or yd.
    • Coverage ratio ≈ Distance / 4.
  • Geolocation (Option):

    • Built-in GNSS receiver for determining latitude, longitude, and altitude (MSL).
    • 72 channels with support for GNSS systems (GPS/QZSS, Galileo, GLONASS, BeiDou) and the SBAS extension system (WAAS, EGNOS, MSAS, GAGAN).
    • Position accuracy: Autonomous 2.5 m CEP.

>

>

Description

The Narda FieldMan (NBM Successor) is used to make precision measurements to establish human safety, particularly in workplace environments where high electric or magnetic field strengths are likely to occur. An essential task is to demonstrate compliance with general safety regulations, such as FCC, IEEE, ICNIRP or EMF Directive 2013/35/EU. Examples of measurement environments are:


› Radiocommunication base stations (e.g. IEC / EN 62232)
› Broadcasting systems (e.g. IEC 62577)
› Radar and satellite communications systems
› Induction heating and melting (e.g. EN 50519)
› Household appliances (e.g. IEC / EN 62233)
› Electric welding equipment (e.g. IEC / EN 62822)
› Railway environment (e.g. EN 50500)
› Automotive environment (e.g. IEC 62764)
› Energy supply systems (e.g. IEC / EN 62110)
› Medical electrical equipment (e.g. IEC / EN 60601)
› TEM cells and absorber chambers to demonstrate electromagnetic compatibility (EMC)

Use and benefit

During the development of the FieldMan, special attention was paid to achieving simple, well-structured and fluid operation. The arrangement of many display elements known from smartphones, the self-explanatory symbols and the FieldMan processes, which are perfectly tailored to the measurement tasks, offer maximum ease of use. The large, anti-glare HD color display shows the measured values numerically and graphically with all important additional information in a clear form and is easy to read even in bright sunlight. From simple broadband measurements to sophisticated time signal recording in real time or spectral frequency analysis of low-frequency fields, you have the right operating modes at your disposal.


Measurement results can be commented on by text or voice and can be saved as a screen copy at the push of a button. Built-in sensors record the current environmental conditions as well as the position data and automatically add them to the measurement result. The built-in distance meter (option) shows you the measuring height above the ground, which makes the exact positioning of the measuring device much easier. For a better overview, the measurement results can be assigned to freely definable projects, which is particularly helpful when the measurement locations change frequently. If you want to document your measurement results with photos and videos, the FieldMan smartphone app will help you. For example, the app wirelessly transfers media files created with the smartphone to the project directory on the FieldMan SD memory card. A newly developed, extremely powerful PC software "Narda-TSX" is available for documenting the measurement results, media and other information. It is Narda's new software platform for device configuration, measurement data evaluation and documentation, which in addition to the FieldMan will also support other Narda products in the future.