Anritsu Field Master Pro Spectrum Analyzer

Manufacturer part number: MS2080A

Field Master Pro Spectrum Analyzer

PURCHASE

Available	QTY	Price
New:	Qty: + -
Used:	Qty: + -		Configurations

Available Configurations

Overview
Apllications
Specifications
Options & packages reference
Documentation

The MS2080A builds on Anritsu’s pioneering history of developing reliable and dependable instruments for the world’s most demanding RF measurements in the toughest environments. Weighing less than 9 pounds (4 kg), the MS2080A is small, compact, and easy to carry.

When hunting for interfering RF signals in the field, MS2080A offers a wide range of features to identify and locate the source. A fast sweep speed of 45 GHz/s coupled with AM/FM demod and RF source geolocation help pinpoint the position of interfering signals fast. The optional real-time spectrum analyzer captures even the shortest of bursted or TDD signals and the addition of the S331P Site Master enables cable and antenna line sweep measurements on the same instrument.

LTE and 5G base station measurement options support operators and contractors perform the essential measurements when installing or optimizing the network.

For use on the bench, the hard case with rubberized easy grip bumpers and integrated kick stand makes the MS2080A an ideal instrument for general purpose lab measurements where portability and space are at a premium.

Interference hunting and spectrum clearing – fast sweep speeds a low distortion front-end and the Real Time spectrum analyzer combine to quickly identify interfering signals. A special interference finder option adds AM/FM demodulation with audio output plus interfering source triangulation on a digital map to pinpoint and identify the location and source of interference.
Broadcast transmitter analysis – a comprehensive range of transmitter measurements – including: AM/FM modulation quality measurements, harmonic, spurious, occupied bandwidth, channel power, and adjacent channel power – ensures conformity to regulatory requirement
5GNR base station measurement – validate the performance of the gNB base station with essential measurements that are in full compliance with 3GPP TS 38.104 V15, including:
- frequency error
- time offset
- cell/sector ID
- SSB: RSRP, RSRQ, SINR, RSSI
- modulation quality EVM
- unwanted emissions
- occupied bandwidth
- adjacent channel leakage ratio
- transmitter harmonics and spurious
- EIRP
5G/LTE coverage mapping – receive a clear representation of the signal strength of 5G/LTE transmitters over intended geographic area by continuously measuring RF data – including RSRP, RSRQ, SINR, channel power – with results graphically displayed on a digital map or building floor plan.
Cable and Antenna measurements – Line sweep RF cables and antennas at base station locations with accessory S331P Site Master

Frequency range	9 kHz to 4 GHz (Option 704) 9 kHz to 6 GHz (Option 706)
Sweep speed	45 GHz/s
Phase noise	-95 dBc/Hz @ 1 GHz freq and 100 kHz offset
DANL	< -165 dBm (with pre amp)
Maximum input signal	+30 dBm
Dynamic range	>105 dB minimum at 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW
Amplitude range	DANL to +30 dBm
Input damage level	5 Watts
Frequency accuracy	Aging: ±1.0 x 10–6 per year Accuracy: ±0.28 x 10–6 (-10 °C ± 55°C) plus aging
Amplitude accuracy	±1 dB (± 0.5 dB typical)
Resolution bandwidth in sweep mode	1 Hz to 5 MHz
Resolution bandwidth in zero span	10 Hz to 20 MHz
RTSA bandwidth	40 MHz
Demodulation	5GNR base station, LTE base station, AM/FM modulation quality

Option	Description
MS2080A-0704	9 kHz to 4 GHz Spectrum Analyzer
MS2080A-0706	9 kHz to 6 GHz Spectrum Analyzer
MS2080A-0003	Time Domain Reflectometry (TDR) Measurement (Requires S331P, sold separately)
MS2080A-0017	Secure Communication
MS2080A-0019*	High Accuracy Power Meter (Requires USB power sensor, sold separately)
MS2080A-0024*	Interference Finder (Option 31 and directional antenna recommended, sold separately)
MS2080A-0027	Channel Scanner
MS2080A-0031*	GNSS Receiver (requires GNSS antenna, sold separately)
MS2080A-0090*	Gated Sweep
MS2080A-0102*	40 MHz Analysis Bandwidth
MS2080A-0126	IQ Waveform Capture (Includes MX280005A IQ Signal Master base feature set)
MS2080A-0127	IQ Waveform Streaming (Includes MX280005A IQ Signal Master base feature set) (requires option 126)
MS2080A-0128	Enable Vector Signal Analysis (Requires Option 126)
MS2080A-0199*	Real-time Spectrum Analysis (RTSA)
MS2080A-0400	Enable Vision Monitor
MS2080A-0407	Enable Vision High-Speed Port Scanner
MS2080A-0431*	Coverage Mapping (Requires Option 31, cannot be ordered with Option 9031)
MS2080A-0444*	EMF Measurement (Requires Anritsu isotropic antenna, sold separately)
MS2080A-0509*	AM/FM Modulation Measurements
MS2080A-0871	WCDMA FDD Measurements (Requires Option 31)
MS2080A-0883*	LTE FDD/TDD Measurements (Requires Option 31)
MS2080A-0888*	5G NR Downlink Measurements (Requires Option 31)
MS2080A-xxxx-0097	Accredited Calibration to ISO17025 and ANSI/NCSL Z540-1 (xxxx is the frequency option number)
MS2080A-xxxx-0098	Standard Calibration to ISO17025 and ANSI/NCSL Z540-1 (xxxx is the frequency option number)
MS2080A-xxxx-0099	Premium Calibration to ISO17025 and ANSI/NCSL Z540-1 plus test data (xxxx is the frequency option number)

Spec sheet User Manual

Description

LTE and 5G base station measurement options support operators and contractors perform the essential measurements when installing or optimizing the network.

Product tags

LOCATIONS