Close
You have no items in your shopping cart.

Electromagnetic compatibility (EMC) is the branch of electrical engineering that focuses on protecting electronic devices from the interference of electromagnetic energy. The unintentional generation or reception of electromagnetic energy may cause electromagnetic interference (EMI) and damage the equipment. Along with the steep and continuous increase in electronic device usage comes a corresponding increase in the possibility of interference, making EMC testing more crucial than ever.

The four types of EMC testing include: conducted immunity, conducted emissions, radiated immunity, and radiated emissions. Specific standards have been developed to ensure safety and repeatable results when testing equipment that must be followed. IEC (International Electrotechnical Commission), ISO (International Organization for Standardization), and CISPR                   (International Special Committee on Radio Interference) work individually and together to create these standards in order to provide solutions to current global change. Our EMC and EMI testing equipment has been designed to fulfill these specific test standards such as MIL-STD-461EN/IEC-61000-4, and CISPR.

Developers of automotive, medical, defense, aerospace, and consumer electronics technology all rely on EMC testing to ensure devices meet strict industry requirements.

  

Avalon Test Equipment carries a wide variety of EMC test equipment ranging from ESD guns and RF amplifiers to immunity testers. Browse our inventory by category to fulfill specific testing requirements and Test With Confidence®.

Read More

Read Less

3 Items in Grid 4 Items in Grid List

Haefely ONYX 16 ESD Simulator/Gun

Haefely ONYX 16 ESD Simulator/Gun, 16kV has been specially designed to meet all latest international standards, including IEC61000-4-2 edition 2, and are the most ergonomic battery and AC power operated 16kV guns on the market.

Keysight E7402A EMC Spectrum Analyzer

Early evaluation of your design's EMI performance is essential for a successful product. The Keysight E7402A EMC Spectrum Analyzer is part of the E7400A Series which provides the capabilities you need in an analyzer to make in-house EMI pre-compliance testing a reality.

Keysight N9038A MXE EMI Receiver

3 Hz to 3.6, 8.4, 26.5, and 44 GHz

M Precision D567-L5 Lightning Test System Module

The D567-L5 LTS Surge Network Module produces waveform 5A to level 5 lightning testing. This module provides a pin injection, single stroke, multiple stroke test capability to level 5.

M Precision D568-L5 Lightning Test System Module

For pin-injected transient susceptibility testing to Boeing D6-16050-5 and equivalent Airbus standards

Rohde & Schwarz ESCI EMI Test Receiver

For compliance tests meeting all civil standards from 9 kHz to 3/7 GHz

Solar 9247 LISN

Solar 9247-50-TS-50-N LISN for CISPR 16-1, FCC Part 15, ANSI C63.4

Tektronix MCA3040 Microwave/Counter Analyzer & Power Meter

Tektronix MCA3040 Microwave/Counter Analyzer & Power Meter, 40 GHz

Teseq CDN 3063-S63 3 Phase, 63 Amp Automated Surge CDN Coupler for NSG 3040/3060

Three phase 480 V/63 A automatic coupling decoupling network (CDN) for Surge and Ring Wave pulses up to 6.6 kV

Teseq MD 4070 Monitoring Device

The Teseq MD 4070 Monitoring Device 10 kHz to 400 (600) MHz is suitable for BCI testing per ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 CS114 and various automotive standards

Teseq NSG 3025 Burst Generator

Portable Burst Generatorr 4.8kV, 1MHz, 1-ph, 16A w/display with built-in backfilter coupling/decoupling network. Includes WINDOWS software package.

Teseq NSG 3040-IEC Multifunction Burst Generator

Teseq’s new NSG 3040 is an easy-to-use multifunction generator that simulates electromagnetic interference effects for immunity testing in conformity with international, national and manufacturers’ standards including the latest IEC/EN standards.

Teseq NSG 3060 Conducted Immunity Transient Generator

Mainframe NSG 3060 with CWM 3650, RWM 3652 and FTM 3425 including CDN 3061-C61 and PQM 3403 includes WIN 3000 basic software and traceable calibration certificate.

Teseq NSG 3150 15 kV Combination Wave Surge Generator

TESEQ’s new NSG 3150 15 kV Combination Wave Surge generator sets a new standard in the industry and represents the perfect solution for your immunity tests in compliance with IEC/EN 61000-4-5.

Teseq NSG 4060 Low Frequency Immunity Test System

The Teseq NSG 4060 is an EMC immunity test system for the frequency range of 15 Hz - 150 kHz

Teseq NSG 4070B Conducted and Radiated Immunity Test System

The Teseq NSG 4070B Test System for Conducted and Radiated Immunity is a multi-functional device for carrying out EMC immunity tests with a frequency range of 9KHz to 1GHz.

Teseq NSG 4070C-45 Compact Immunity Test System

Compact immunity test system NSG 4070C, 4 kHz–1 GHz RF generator and power meter (with integrated power amplifier 45 W module 9 kHz–1 GHz)

Teseq NSG 434 ESD Simulator/Gun

8.8kV Air, 6.6kV Contact

Teseq NSG 435 ESD Simulator/Gun

16.5kV Air, 9kV Contact

Teseq NSG 437 Automotive ESD Simulator/Gun

Teseq NSG 437-AUTOMOTIVE ESD Simulator/Gun, 30kV includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual

Teseq NSG 437 ESD Simulator/Gun

Teseq NSG 437 ESD Simulator/Gun, 30kV Includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual

Teseq NSG 438 ESD Simulator/Gun

30kV ESD Simulator/Gun with built in charge remover

Teseq NSG 5500-1 Automotive Transient Immunity Tester

Included in base system: HV Supply, Processor, Power Entry Module, RS232 Interface, IEEE Interface, CDN 5500 100A coupler, FT 5530 Fast Transient Generator, Autostar Software, traceable calibration certificate.

Teseq NSG 5601-100 Automotive Transient Generator

Utilizing the only automotive EMC specific synchronized, multi-channel function generator (FG) in the world, the software integrates the various system components seamlessly into the overall system concept with uniform operating procedures and user guidance together with a comprehensive test result reporting facility.

Teseq Profline 2103-240

The Teseq Profline 2103-240 is an accurate and flexible single phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3, supporting testing on products consuming up to 11 Arms and 92 A peak @ 230 VAC.

Teseq ProfLine 2105

ProfLine 2105 is an accurate and flexible single-phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.

Teseq ProfLine 2105-208 5 kVA Single Phase Harmonics & Flicker Measuring System

The Teseq ProfLine 2105-208 is an accurate and flexible single phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.

Teseq ProfLine 2105-400 5 kVA Single Phase Harmonics & Flicker Measuring System

The Teseq ProfLine 2105-400 is an accurate and flexible single phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.

Teseq ProfLine 2130-208

The Teseq ProfLine 2130-208 is an accurate and flexible three phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.

Filter by:

Clear All
Close