Close
You have no items in your shopping cart.

EM Test ESD NX30 ESD Simulator/Gun

Manufacturer part number: NX30
The EM Test ESD NX30 is an ESD tester to simulate ESD pulses at higher voltages up to 30 kV in both air and contact discharge mode. It satisfies requirements exceeding the EN/IEC 61000-4-2 test levels and complies with automotive test applications.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

The ESD NX30 electrostatic discharge simulator is an easy-to-use tester. It consists of a power supply unit and the discharge gun, operated from the discharge gun. It generates electrostatic discharges up to 30 kV in both air and contact discharge mode. The discharge tips can easily be changed. The discharge networks can be easily changed as they are plugged into the discharge gun. The actual discharge network in use is recognized by the controls and indicated in the display.

The ESD NX30 is either mains supplied or supplied by a DC source. Even battery-powered operation is possible. Battery operation becomes relevant for testing e.g. as per DC-11224 or VW TL 824 66, ESD Operating Test, where the ground of the ESD generator is connected to the Field Coupling Plane and the Horizontal Coupling plane but not directly to the Reference Ground Plane. Additionally, a fiber optic link is offered as an option to communicate with the ESD NX30 separating the sensitive computer from the test set-up and to avoid ground loops.

Features: 

  • Test voltage up to 30 kV for air and contact discharge
  • Color touch display
  • Discharges up to 25 Hz
  • 80 easy-to-change R/C-networks and tips
  • Switchable Bleed-Off function
  • Built-in activity log
  • AC mains supply and DC supply
  • Battery tested to 30,000 pulses @30 kV
  • Discharge tips for AD and CD
  • 25 mm discharge sphere
  • Grounding lead 2 m
  • Test Certificate
  • User Manual
  • HV power supply: Up to 30 kV DC
  • Built-in Battery: Approx. 30 k discharges
  • Interface: Optical and interlock
  • Controls: Color touch display
  • Test level: 200 V to 30,000 V
  • Polarity: Positive, negative, alternating, selectable
  • Discharge mode: Air or Contact discharge, selectable
  • Discharge tip: Point and ball type
  • Contact Discharge: 200 V - 30,000 V ± 5 %
  • Air discharge: 200 V - 30,000 V ± 5 %
  • Resolution :100 V steps
  • Holding time (AD): More than 5 s
  • Single pulse: Release of a single pulse
  • IEC 61000-4-2
Description

The ESD NX30 electrostatic discharge simulator is an easy-to-use tester. It consists of a power supply unit and the discharge gun, operated from the discharge gun. It generates electrostatic discharges up to 30 kV in both air and contact discharge mode. The discharge tips can easily be changed. The discharge networks can be easily changed as they are plugged into the discharge gun. The actual discharge network in use is recognized by the controls and indicated in the display.

The ESD NX30 is either mains supplied or supplied by a DC source. Even battery-powered operation is possible. Battery operation becomes relevant for testing e.g. as per DC-11224 or VW TL 824 66, ESD Operating Test, where the ground of the ESD generator is connected to the Field Coupling Plane and the Horizontal Coupling plane but not directly to the Reference Ground Plane. Additionally, a fiber optic link is offered as an option to communicate with the ESD NX30 separating the sensitive computer from the test set-up and to avoid ground loops.

Features: 

  • Test voltage up to 30 kV for air and contact discharge
  • Color touch display
  • Discharges up to 25 Hz
  • 80 easy-to-change R/C-networks and tips
  • Switchable Bleed-Off function
  • Built-in activity log
  • AC mains supply and DC supply
  • Battery tested to 30,000 pulses @30 kV