The EM Test DITO is best designed for the different requirements for testing ESD. Its powerful battery allows generating more than 50,000 pulses at 16.5kV. This is enough for more than a full day's job. Its different menus lead the user through standard tests, helps to evaluate the test points, and allows to find susceptibility levels.
It is unlike any other ESD generator. Its ergonomic design is recognized to be more user-friendly. There is no part of DITO that hides the discharge tip while watching the display or operating the DITO. You see where you point the tip no matter how you direct DITO to the DUT.
The discharge voltage is measured and recorded. Discharge is stopped automatically when the battery voltage becomes low. The user is informed when DITO cannot charge properly. All this helps to assure reliable and reproducible tests without any question or doubt.
Discharge tips and discharge networks can easily be changed without disassembling the DITO; simply remove one and plug-on another tip or module. The discharge modules are automatically recognized and the R/C configuration is shown in the display. You just can't use a wrong discharge network!
Features:
- Most ergonomic design
- Lightweight (870g)
- Interchangeable discharge tips
- Interchangeable R/C networks
- LiFePO4 power booster to perform long-duration tests
- Library of standard test routines
- Test voltage measurement and control
- Various test routines for testing and evaluation
- High-sophisticated user guidance by test plans created by esd.control software
- Optional fiber optic link between DITO and computer (USB port)
