Narda-STS EB 5091 Probe: E-Field, shaped IEEE, 3MHz to 50GHz, 0.5 to 600% of IEEE, C95.1-2005 for People in Controlled Environments. For use with NBM-series meters.
ETS-Lindgren's Model HI-6053 is a battery-operated electric field probe that provides broadband frequency coverage and wide dynamic range that satisfies the demands of most test requirements.
Consists of three loop probes, one stub and one ball probe, an extension handle, an optional battery-powered preamplifier, and a foam-lined carrying case with a manual and application note. The handle of each probe terminates in a BNC connector. Probes are designed to be used with a signal analyzing device such as an oscilloscope or spectrum analyzer. The optional preamplifier is useful when signal amplification is necessary for the analyzing device.
Narda-STS NBM-520 is the most accurate non-ionizing radiation survey system available. It provides broad frequency coverage of electric and magnetic fields.
The Narda-STS NBM-550 Logging Broadband Field Meter is the most accurate non-ionizing radiation survey system available. It performs electric and magnetic field measurements from RF to microwave. Both flat response probes and probes shaped to international standards are available.
Narda-STS EC 5091 Probe: E-Field, shaped SC6 Canada, 300kHz to 50GHz, 0.5 to 600% of Safety Code 6 for People in Controlled Environments. For use with NBM-series meters.
Narda-STS ED5091 Probe: E-Field, shaped ICNIRP, 300kHz to 50GHz, 0.5 to 600% of ICNIRP Recommendations for Occupational Exposures. For use with NBM-series meters.