Conducted Emissions

Com-Power CLA-050 10mm Absorbing Clamp is suitable for 30 MHz - 1 GHz frequency range and offers RF disturbance power measuring, according to CISPR 14 (EN 55014)

150 kHz–30 MHz

The Com-Power PAM-6000 1 - 6 GHz High Gain Preamplifier is intended for improving measurement system sensitivity during EMC compliance testing. It has a frequency range of 1 GHz to 6 GHz. It has gain of 30 dB. Therefore, It amplifies the signals that were previously hidden below the noise floor of the EMI receiver so that it can be seen and measured.

1 MHz - 1 GHz

18 - 26.5 GHz

20 MHz - 4 GHz, 24 dB. Will improve overall system sensitivity. Designed to meet the needs of your various testing requirements.

150 kHz–30 MHz

The F-33-2 is for laboratory and field testing. The usable frequency range of this probe is 1 kHz – 250 MHz.

18 - 40 GHz. The Preamplifier will provide reliable, repeatable measurements. An ideal solution to improve system sensitivity for compliance testing.

Impedance stabilization networks (ISN, or with CISPR 16-1-2 called AAN: asymmetric artificial network) are defined for measuring of conducted common mode disturbances at information technology equipment (ITE) as required in CISPR 22 and CISPR 32. The ISN is placed between the equipment under test (EUT) and auxiliary equipment (AE) or load which are necessary for the operation of the EUT.

100 Hz - 1000 MHz, 32dB gain

For Power Line Telecommunication (PLT) 1.6 to 30 MHz

150 kHz–30 MHz

150 kHz to 30 MHz, CISPR 16-1-2 / ANSI C63.4, 50 microhenry / 20 Amps

150 kHz–30 MHz

Early evaluation of your design's EMI performance is essential for a successful product. The Keysight E7402A EMC Spectrum Analyzer is part of the E7400A Series which provides the capabilities you need in an analyzer to make in-house EMI pre-compliance testing a reality.

10 kHz–10 MHz, 50 microhenry / 25 Amps

For Power Line Telecommunication (PLT)

Impedance Stabilization Network for 8 lines

150kHz to 30MHz

9 kHz–30 MHz, 50/250 uH, 500 VAC

For ISPR 16-1-2/ANSI C63.4, 9 kHz - 30 MHz.

Intended for connection to cable category 6

For use with coaxial lines, 150 kHz to 230 MHz

For use with screened RJ45 connections, 150 kHz to 230 MHz

15kg