CE Mark Testing
Select Subcategory
CE marking is used to indicate that a product meets the European Union's (EU) standards for health, safety, and environmental protection. The CE mark is a requirement for the distribution of a variety of products in the EU. Meeting the safety requirements to receive CE marking is not a standard, but rather a legal requirement of the EU. When a manufacturer marks a product with the CE mark, they are declaring that it meets all of the legal requirements associated with CE marking. The CE mark allows products to be sold within the European Economic Area (EEA) without restrictions.
Rent or purchase equipment to certify your electrical product with the CE Mark from Avalon Test Equipment and Test With Confidence®.
Read More
Read Less
Teseq NSG 3060 Conducted Immunity Transient Generator
Mainframe NSG 3060 with CWM 3650, RWM 3652 and FTM 3425 including CDN 3061-C61 and PQM 3403 includes WIN 3000 basic software and traceable calibration certificate.
Teseq NSG 4060 Low Frequency Immunity Test System
The Teseq NSG 4060 is an EMC immunity test system for the frequency range of 15 Hz - 150 kHz
Teseq NSG 4070C-45 Compact Immunity Test System
Compact immunity test system NSG 4070C, 4 kHz–1 GHz RF generator and power meter (with integrated power amplifier 45 W module 9 kHz–1 GHz)
Teseq NSG 4070C-80 Compact Immunity Test System
With integrated power amplifier 80 W module 150 kHz–230 MHz
Teseq NSG 437 Automotive ESD Simulator/Gun
Teseq NSG 437-AUTOMOTIVE ESD Simulator/Gun, 30kV includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual
Teseq NSG 437 ESD Simulator/Gun
Teseq NSG 437 ESD Simulator/Gun, 30kV Includes: Discharge Pistol, IEC 61000-4-2 330 Ohm/150pF High Voltage Network, Mains adapter / charging unit 80 – 240VAC, Ground cable, User manual
Teseq Profline 2103-240
The Teseq Profline 2103-240 is an accurate and flexible single phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3, supporting testing on products consuming up to 11 Arms and 92 A peak @ 230 VAC.
Teseq ProfLine 2105
ProfLine 2105 is an accurate and flexible single-phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.
Teseq ProfLine 2105-208 5 kVA Single Phase Harmonics & Flicker Measuring System
The Teseq ProfLine 2105-208 is an accurate and flexible single phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.
Teseq ProfLine 2105-400 5 kVA Single Phase Harmonics & Flicker Measuring System
The Teseq ProfLine 2105-400 is an accurate and flexible single phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.
Teseq ProfLine 2130-208
The Teseq ProfLine 2130-208 is an accurate and flexible three phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-2 and IEC 61000-3-3.
Teseq ProfLine 2145-208
ProfLine 2145 is an accurate and flexible three phase system designed to measure harmonics & flicker in accordance with IEC 61000-3-12 and IEC 61000-3-11 on products consuming up to 62 A per phase @ 230 VAC.
Teseq CDN 500 Capacitive Coupling Clamp
Manufactured exactly in accordance with the drawings and specifications of ISO 7637-3 for capacitively coupling the transients onto cables and wiring harnesses. With its characteristic impedance of 50 Ω , connected to the generator via a coaxial cable and terminated on the far side with a 50 Ω load resistor.
EM Test VDS 200Q100 4-Quadrant Voltage Drop Simulator
The VDS 200Q series is used to simulate the various battery supply waveforms recommended by international standards and by car manufacturer requirements. Available to rent!
A.H. Systems SAS-574 Double Ridge Guide Horn Antenna
The A.H. Systems Double Ridged Guide Horn is a broadband antenna that offers excellent performance over the frequency range of 18GHz to 40GHz. High gain, low VSWR, input handling capability up to 10 watts CW and rugged design make this horn antenna excellent for both immunity and emissions testing.
Rohde & Schwarz ESR7 EMI Test Receiver
input 1, AC coupled: 10 MHz to 7 GHz
input 1, DC coupled: 9 kHz to 7 GHz
input 2, DC coupled: 9 kHz to 1 GHz
input 1, DC coupled: 9 kHz to 7 GHz
input 2, DC coupled: 9 kHz to 1 GHz
Keysight E7402A EMC Spectrum Analyzer
Early evaluation of your design's EMI performance is essential for a successful product. The Keysight E7402A EMC Spectrum Analyzer is part of the E7400A Series which provides the capabilities you need in an analyzer to make in-house EMI pre-compliance testing a reality.
Rohde & Schwarz ESU8 EMI Test Receiver
The R&S® ESU is a family of CISPR 16-1-1-compliant EMI test receivers that meet all civil and military standards for electromagnetic disturbance measurements.
