Close
You have no items in your shopping cart.

Teseq CDN S751A Coupling/Decoupling Network

Manufacturer part number: CDN-S751A
75 Ohm BNC RF Coupler for IEC 61000-4-6 Testing
PURCHASE
Available QTY Price
New:   0
+ -
$0.00
Used:   0
+ -
$0.00 Configurations
X

Available Configurations

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.

Features

  • Coupling networks designed for IEC/EN 61000-4-6
  • Testing for 75 Ohm Coaxial Cables
  • Includes calibration adapters

 

  • Frequency Range: 150 kHz to 230 MHz
  • Power Rating (EUT- and AE Port)
    • AC Max. Voltage (Line to Ground): 250 V
    • DC Max. Voltage (Line to Ground): 400 V
    • Current Max.: 1000 mA
    • Test Voltage: 750 V DC, 2 sec
  • Common Mode Impedance (EUT Port)
    • 150 kHz to 26 MHz: 150 Ω ±20 Ω
    • 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
  • Phase Angle (EUT Port) 150 kHz to 30 MHz: 0° ±20°
  • Coupling Path (In/Out Port/EUT)
    • Connection: BNC 50 Ω
    • RF Voltage: < 20 V
  • Voltage Division Factor (RF Input to EUT Port)
    • 150 kHz to 80 MHz: 10 dB ±1 dB
    • 80 MHz to 230 MHz: 10 dB +3 dB / -2 dB
  • Transmission Bandwidth (Wanted Signal) EUT/AE b3 dB: > 2 GHz sin.
  • Decoupling of CM Disturbance (RF Port/AE)
    • 150 kHz: > 60 dB
    • 1.5 MHz: > 60 dB
    • 30 MHz: > 50 dB
    • 230 MHz: > 40 dB
  • Operating Temperature: 5°C to 40°C
  • Relative Humidity: Up to 80%
  • Dimensions: 100 mm x 100 mm x 240 mm
  • Weight: Approx. 1.5 kg
Description

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.

Features

  • Coupling networks designed for IEC/EN 61000-4-6
  • Testing for 75 Ohm Coaxial Cables
  • Includes calibration adapters

 

Product tags