Close
You have no items in your shopping cart.

Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network

Manufacturer part number: CDN M016
Designed for IEC/EN 61000-4-6 conducted RF immunity testing with switchable M2 or M3, types with 4 mm banana sockets, and a frequency range of 150 kHz–230 MHz.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Networ

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Whilst the published standard only specifies the performance of CDN from 150 kHz to 80 MHz, most of Teseq CDNs are specially designed to give the same performance to a wider frequency range. This is required by some product specific standards. Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.

SPECIFICATIONS

Voltage RatingAC max. voltage (line to ground): 250 V DC max. voltage (line to ground): 400 V; 3 kV DC, 2 sec
Frequency Range150 kHz to 230 MHz
Standards MetIEC/EN 61000-4-6
RF ConnectorBNC 50 Ω
Mains & EUT Connections4 mm banana
Current Rating16 Amps
Common Mode Impedance150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω
Application/Test Typeswitchable 2 or 3 power lines, (L+N or L+N+PE)
Insertion LossLess than 0.1 dB
RF Input Voltage30 Volts (Max)
Voltage Division Factor150 kHz to 80 MHz: 9.5 dB ±1 dB 80 MHz to 230 MHz: 9.5 dB +3 dB / -2 dB
Decoupling of Common Mode Disturbance150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB
Dimensions3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)
Weight3.3 Lbs (1.5 kg)

Included with the Teseq CDN M016

  • M016 CDN
  • QTY 2 CAL U100B
  • SAR MA31
  • QTY 2 SAR M300
  • SAR M116
  • A 50-N
  • NIST Calibration with Data
  • Carrying Case
  • User Manual
Description

Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Networ

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

Whilst the published standard only specifies the performance of CDN from 150 kHz to 80 MHz, most of Teseq CDNs are specially designed to give the same performance to a wider frequency range. This is required by some product specific standards. Each CDN is also useable for emission testing. Special types meet the requirements of CISPR 15 or can be used as impedance stabilization network (ISN) defined in CISPR 22.

Product tags