Kaelus IWA-0140A Cable & Antenna Analyzer 54MHz - 4100MHz

Manufacturer part number: IWA-0140A

Cable & Antenna Analyzer 54MHz - 4100MHz.The iWA series Cable & Antenna Analyzer is the evolution of our well respected and very reliable iVA platform. The iWA extended frequency range to 4GHz supports Land Mobile Radio (LMR) and 5G midband networks while enabling users to accurately measure and locate VSWR/return loss faults in their RF infrastructure. In addition, the Bluetooth wireless connectivity allows unprecedented measurement flexibility. The iWA is an ergonomically designed, rugged battery operated module that is remotely controlled with any tablet, smartphone or laptop computer.

PURCHASE

Available	QTY	Price
New: 0	Qty: + -	$0.00
Used: 0	Qty: + -	$0.00	Configurations

FEATURES

Redefining site certification sweep testing, dramatically reducing test time on site
Simple to operate, highly intuitive software user interface with the unique ability to generate and complete the test report onsite with no post-processing or additional data entry required
Kaelus Unify software available for Android, iOS and Windows allows Kaelus iPA(s) and iWA(s) to combine your RL data with your PIM data into a single report.
Geotag each test point, insert a Google Maps® snapshot directly into the report
Instrument controlled via robust Bluetooth connection.
Connect directly to the device under test; eliminates the need for a phase stable cable in most cases

Power & Battery

USB-compatible power source connected to USB port of iWA
Battery operating time: 7.5 hours at typical usage factor

iWA Analysis Mode - Return Loss

Sweep speed: 12ms per frequency point
RF Output Power: 0dBm max
Return Loss Dynamic Range: 40dB
Cable Loss Measurement Range: 0 - 20dB

Return Loss Measurement Accuracy (Applies over the temperature range −10°C to +45°C, with less than 5°C deviation from calibration temperature)

0 - 10dB: ± 0.4dB
10 - 20dB: ± 0.6dB
20 - 30dB: ± 1.5dB
30 - 40dB: ± 4.0dB

Interference Immunity

+10dBm at 500kHz offset from stimulus frequency

System Impedance

50 ohms

Cable Loss Measurement

Measured as a 1-port measurement, with the far end of the cable terminated in an open or short circuit
20dB capability requires ideal connector return loss

Instrument Control

User Interface: USB or Bluetooth-supported user device with iWA application software installed
Supported Devices:Communications Interface to iWA: Bluetooth and USB 2.0
- Tablet (iOS & Android)
- Smartphone (iOS & Android)
- PC (Windows 10 or higher)
Bluetooth Antenna: Integrated into housing

Mechanical

Dimensions (H x D x W): 52 x 69.5 x 216mm | 2.06 x 2.73 x 8.51in
Weight: 0.7kg | 1.54 lbs
Connector 1 (RF Test Port):Connector 2: USB 2.0 Mini-B (for charging and connection to iPA or PC)
- iWA-0140A: Type N male, 50 ohms
- iWA-0140B: 4.3-10 male, 50 ohms
Mechanical Shock & Vibration: MIL-PRF-28800F Class 2, ETS 300 019-2-1, -2, -7

Environmental

Operational Temperature Range: -10°C to +55°C | +14°F to +131°F
Ingress Protection: IP54
Altitude: 4600m | 15,000ft maximum
Compliance: CE, FCC, RCM, RoHS
Operational Humidity: 5% to 95% RH non-condensing
Storage Temperature Range: -20°C to +60°C | -4°F to +140°F

Spec sheet User Manual

Description

FEATURES

Redefining site certification sweep testing, dramatically reducing test time on site
Simple to operate, highly intuitive software user interface with the unique ability to generate and complete the test report onsite with no post-processing or additional data entry required
Kaelus Unify software available for Android, iOS and Windows allows Kaelus iPA(s) and iWA(s) to combine your RL data with your PIM data into a single report.
Geotag each test point, insert a Google Maps® snapshot directly into the report
Instrument controlled via robust Bluetooth connection.
Connect directly to the device under test; eliminates the need for a phase stable cable in most cases

Product tags