Part of the test equipment required by most of the Bulk Current Injection test procedure specifications. Allows the user the quickly and easily calibrate the injection probe prior to performing compliance testing.
Designed for the IEC 61000-4-6 Ed 4.0, section 6.2.3.1 – 6.2.3.2 that states “…the increase of the transmission loss of the test jig, produced by the insertion of the Current Clamp, shall not exceed 1.6 dB”. This 1.6 dB requirement is verified by subtracting the insertion loss of the calibration fixture without the Clamp in place from the fixture insertion loss with the Clamp in place.
10 kHz – 400 MHz Frequency Injection Probe Calibration Fixtures Part of the test equipment required by most of the Bulk Current Injection test procedure specifications Calibration fixture allows the user the quickly Easily calibrate the injection probe prior to performing compliance testing
10 kHz – 1 GHz Frequency Injection Probe Model Numbers: F-140, F-140A Injection Probe Calibration Fixtures Part of the test equipment required by most of the Bulk Current Injection test procedure specifications Test fixture allows the user to quickly and easily calibrate the injection probe
150 kHz – 230 MHz Frequency Injection Probe calibration fixtures Part of the test equipment required by most of the Bulk Current Injection Test Procedure Specifications Allows the user to quickly and easily calibrate the injection probe prior to performing the compliance testing