Tektronix BSA125C BERTScope

Manufacturer part number: BSA125C

PURCHASE

Available	QTY	Price
New: 0	Qty: + -	$0.00
Used: 0	Qty: + -	$0.00	Configurations

Available Configurations

Overview
Specifications
Documentation

TheTektronix BSA125C BERTScope™ Tester provides a new approach to signal integrity measurements of serial data systems. Perform bit error ratio detection more quickly, accurately, and thoroughly by bridging eye diagram analysis with BER pattern generation. The BERTScope BSA Series enables you to easily isolate problematic bit and pattern sequences, then analyze further with seven types of advanced error analysis that deliver unprecedented statistical measurement depth.

Features

12.5 Gb/s
100 MHz
Integrated, calibrated stress generation to address the stressed receiver sensitivity and clock recovery jitter tolerance test requirements for a wide range of standards
Electrical stressed eye testing
Tolerance compliance template testing with margin testing
Integrated eye diagram analysis with BER correlation

Display: TFT Touch screen, 640 x 480 VGA
Supported Interfaces: USB 2.0 (6 total, 2 front, 4 rear), DVI/VGA external display
Temperature
- Operating: +10 °C to +35 °C (50 °F to 95 °F), with 15 °C (59 °F)/hour maximum gradient, non condensing, derated 1 °C (34 °F) per 300 m (984 ft) above 1500 m (4921 ft) altitude
- Non-Operating: –20 °C to +60 °C (–4 °F to 140 °F), with 30 °C (86 °F)/hour maximum gradient
Humidity
- Operating: 5% to 95% relative humidity at up to 30 °C (86 °F), 5% to 65% relative humidity above 30 °C (86 °F) up to 35 °C (95 °F), non condensing, limited by maximum wet-bulb temperature of 29 °C (84 °F), derates relative humidity to 65% at +35 °C (95 °F)
- Non-Operating: 5% to 95% relative humidity at up to 30 °C (86 °F), 5% to 65% relative humidity above 30 °C (86 °F) up to 60 °C (140 °F), non condensing, limited by maximum wet-bulb temperature of 29 °C (84 °F), derates relative humidity to 12% at +60 °C (140 °F)
Altitude
- Operating: To 3000 m (9843 ft.)
- Non-Operating: To 12,000 m (39,370 ft.)
Dimensions: 22 cm x 39.4 cm x 52 cm (8.75 in x 15.5 in x 20.375 in)
Weight: 25 kg (55 lbs) instrument only; 34.5 kg (76 lbs) shipping

Tektronix BERTScope Bit Error Rate Analyzers BSA85C, BSA125C, BSA175C, BSA260C, BSA286C Quick Start User Manual

Description

Features

12.5 Gb/s
100 MHz
Integrated, calibrated stress generation to address the stressed receiver sensitivity and clock recovery jitter tolerance test requirements for a wide range of standards
Electrical stressed eye testing
Tolerance compliance template testing with margin testing
Integrated eye diagram analysis with BER correlation

Product tags