Narda-STS-AMB BROADBAND AREA MONITORING STATION

Available	QTY	Price
New: 0	Qty: + -	$0.00
Used: 0	Qty: + -	$0.00	Configurations

	Name	Purchase
	BROADBAND AREA MONITORING STATION	$0.00
	BROADBAND AREA MONITORING STATION	$0.00
	BROADBAND AREA MONITORING STATION	$0.00
	BROADBAND AREA MONITORING STATION	$0.00
	Car Mounting Adapter	$0.00
	Cover extension for 8057/8059 dual probe mode	$0.00
	Lithium-Ion Rechargeable Battery kit for CMK	$0.00
	Fiber Glass Mast including Mast Base for AMB	$0.00
	Cable USB(A)/USB(B) for permanent supply	$0.00
	8059/IP66K (Kit adapter)	$0.00
	O/E converter USB, RP-02/USB	$0.00
	FO Duplex cable RP02 with cable clamp, 10 mt.	$0.00
	FO Duplex cable RP02 with cable clamp, 20 mt.	$0.00
	FO Duplex cable RP02 with cable clamp, 40 mt.	$0.00
	FO Duplex cable RP02, 20 mt.	$0.00
	FO Duplex cable RP02, 40 mt.	$0.00
	Ethernet cable, 2mt	$0.00
	FO Duplex cable RP02, 10 mt.	$0.00

Overview
Documentation
Options & packages reference
Video

Product overview

Simultaneous monitoring of the magnetic and electric field

Internal modem 2G/4G and Wifi for wireless transmission

ITU-T K.83 compliant

Autonomous power supply via solar cells or extra long-life batteries

PC software with alarm functions

IP66 RATED

Broadband, multiband and frequency response probes (ICNIRP 98 and 20, FCC, SC6 and IEEE) from 10 Hz to 60 GHz

Includes SD memory card, temperature/humidity sensor, GPS sensor

Minimum outlay, maximum result

An EMF monitoring system is made up from a series of EMF monitors installed wherever the EMF presence needs to be assessed continuously or by long term observation. The EMF monitors store the data and report them using conventional mobile data communication at set time intervals to a central unit, e.g. PC or data server. The system size can range from a single location up to countrywide coverage. Narda EMF monitors combine all the features that are essential for this purpose: autonomy, outdoor usability, mobility, robustness, and low operating costs. You can be certain to find the ideal solution for every area of application with Narda. And you can depend on its reliability, thanks to our decades of experience coupled with cutting edge technology, backed up by our own certified calibration laboratory

Data sheet

Manual

*AMB-8059-00*
		BROADBAND AREA MONITORING STATION	8059-00	x
		non-rechargeable Li-Ion battery powered, WiFi.		x
		INCLUDING:		x
		- AMB-8059-SW-02 Area Monitor Remote and Control software		x
		- FO Duplex cable RP02, 10 mt.		x
		- O/E converter USB, RP-02/USB		x
		- Swivel joint for installation on AMB-8059-MAST		x
		- Certificate of Calibration		x
		- Li-Ion battery		x
	AMB-8059-01
		BROADBAND AREA MONITORING STATION	8059-01	x
		powered by solar panel with sealed lead acid battery, WiFi		x
		INCLUDING:		x
		- AMB-8059-SW-02 Area Monitor Remote and Control software		x
		- USB cable		x
		- Swivel joint for installation on AMB-8059-MAST		x
		- Certificate of Calibration		x
		- Power supply / USB battery charger PLEASE SPECIFY PLUG		x
	*AMB-8059-02*
		BROADBAND AREA MONITORING STATION	8059-02	x
		non-rechargeable Li-Ion battery powered, with modem 4G, WiFi		x
		INCLUDING:		x
		- AMB-8059-SW-02 Area Monitor Remote and Control software		x
		- USB cable		x
		- Swivel joint for installation on AMB-8059-MAST		x
		- Certificate of Calibration		x
		- Li-Ion battery		x
		REQUIREMENTS FOR REMOTE OPERATION (CSD or GPRS):		x
		- SIM card (enabled for CSD: Circuit Switched Data service or		x
		GPRS or both data communication modes)		x
	AMB-8059-03
		BROADBAND AREA MONITORING STATION	8059-03	x
		powered by solar panel with sealed lead acid battery, with modem 4G, WiFi		x
		INCLUDING:		x
		- AMB-8059-SW-02 Area Monitor Remote and Control software		x
		- USB cable		x
		- Swivel joint for installation on AMB-8059-MAST		x
		- Certificate of Calibration		x
		- Power supply / USB battery charger PLEASE SPECIFY PLUG		x
		REQUIREMENTS FOR REMOTE OPERATION (CSD or GPRS):		x
		- SIM card (enabled for CSD: Circuit Switched Data service or		x
		GPRS or both data communication modes)		x
	PROBES
	E-/H-FIELD PROBES: (AT LEAST ONE NECESSARY FOR OPERATION OF STATION AMB-8059)
	EP-1B-01	Probe: E-Field, 100 kHz3 GHz, Isotropic	EP-1B-01	x
	EP-1B-03	Probe: E-Field, 100kHz7GHz, Isotropic	EP-1B-03	x
	EP-1B-04	Probe: E-Field, 10 Hz5 kHz; 5 V/m20 kV/m, isotropic	EP-1B-04	x
	EP-1B-05	Probe: E-Field, 300kHz18GHz, Isotropic	EP-1B-05	x
	EP-1B-06	Probe: E-Field, 300kHz40GHz, Isotropic	EP-1B-06	x
	EP-1B-08	Probe: E-Field, 100kHz8GHz, Isotropic	EP-1B-08	x
	EP-3B-01	Probe: E-Field, Tri-band, 100 kHz3 GHz / 100 kHz862 MHz	EP-3B-01	x
		/ 933 MHz3 GHz, isotropic		x
	EP-4B-01	Probe: E-Field, Four-band, 100 kHz3 GHz / 925960 MHz	EP-4B-01	x
		/ 18051880 MHz / 2110 -2170 MHz, Isotropic		x
	EP-4B-02	Probe: E-Field, Four-band, 100 kHz7 GHz / 925960 MHz	EP-4B-02	x
		/ 18051880 MHz / 2110 -2170 MHz, Isotropic		x
	HP-1B-01	Probe: H-Field, 10 Hz ͠5 kHz; 50 nT ͠200 uT, isotropic	HP-1B-01	x
NEW	EHP-2B-01	Dual-band electric and magnetic shaped field probe	EHP-2B-01	x
		For ICNIRP 1998 and SC 6 2015		x
		E: 500 kHz ͠9,25 GHz; 0,1 (0,2) ͠1000 %		x
		H: 20 MHz ͠1 GHz; 0,5 (1,0) ͠1000 %		x
NEW	EHP-2B-02	Dual-band electric and magnetic shaped field probe	EHP-2B-02	x
		For ICNIRP 1998 and SC 6 2015		x
		E: 500 kHz ͠60 GHz; 0,1 (0,2) ͠1000 %		x
		H: 20 MHz ͠1 GHz; 0,5 (1,0) ͠1000 %		x
NEW	EHP-2B-03	Dual-band electric and magnetic shaped field probe	EHP-2B-03	x
		For ICNIRP 2020 and FCC 96 326		x
		E: 500 kHz ͠9,25 GHz; 0,1 (0,2) ͠1000 %		x
		H: 20 MHz ͠1 GHz; 0,5 (1,0) ͠1000 %		x
NEW	EHP-2B-04	Dual-band electric and magnetic shaped field probe	EHP-2B-04	x
		For ICNIRP 2020 and FCC 96 326		x
		E: 500 kHz ͠60 GHz; 0,1 (0,2) ͠1000 %		x
		H: 20 MHz ͠1 GHz; 0,5 (1,0) ͠1000 %		x

	ACCESSORIES
		Car Mounting Adapter	650.800.300	x
		(usable probes on the "mobile": models EP-1B-01, EP-1B-03, EP-1B-05, EP-1B-06, EP-1B-08, EP-4B-01, EP-4B-02, HP-1B-01, must have S/N 100WX---- or superior)		x
NEW		Cover extension for 8057/8059 dual probe mode	231.8030.084
		Lithium-Ion Rechargeable Battery kit for CMK	650.000.342	x
		Fiber Glass Mast including Mast Base for mounting the	AMB-8059-MAST	x
		Area Monitor AMB-8057 / AMB-8059		x
		Cable USB(A)/USB(B) for permanent supply	210.500.046	x
				x
		8059/IP66K (Kit adapter)	650.000.310	x
				x
		O/E converter USB, RP-02/USB	650.000.176	x
		FO Duplex cable RP02 with cable clamp, 10 mt.	650.000.289	x
		FO Duplex cable RP02 with cable clamp, 20 mt.	650.000.290	x
		FO Duplex cable RP02 with cable clamp, 40 mt.	650.000.291	x
		FO Duplex cable RP02, 10 mt.	650.000.196	x
		FO Duplex cable RP02, 20 mt.	650.000.257	x
		FO Duplex cable RP02, 40 mt.	650.000.275	x
		Ethernet cable, 2mt	210.500.027	x

Description

Product overview

Simultaneous monitoring of the magnetic and electric field

Internal modem 2G/4G and Wifi for wireless transmission

ITU-T K.83 compliant

Autonomous power supply via solar cells or extra long-life batteries

PC software with alarm functions

IP66 RATED

Broadband, multiband and frequency response probes (ICNIRP 98 and 20, FCC, SC6 and IEEE) from 10 Hz to 60 GHz

Includes SD memory card, temperature/humidity sensor, GPS sensor

Minimum outlay, maximum result

Product tags

electrical safety tester (4)
,
rf safety monitor (9)
,
rf safety (13)
,
rent rf safety equipment (4)
,
rf safety rental (5)
,
narda-sts-amb broadband area monitoring station (1)

Narda-STS-AMB BROADBAND AREA MONITORING STATION

Available Configurations