Close
You have no items in your shopping cart.

A.H. Systems BCP-619 Broadband RF Current Probe

Manufacturer part number: BCP-619
This probe can be used to measure small RF currents in the basic configuration and pulse currents with wide ranging magnitudes. 100 Hz - 100 MHz.
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-619 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other 50-ohm impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multi-conductor cables, ground and bonding straps, shielded conduits, and on coaxial cables.

For ease and convenience of performing conducted measurements, all of our current probes utilize the split type clamp-on design. Small and lightweight, each Current Probe is manufactured to exacting standards, thus insuring repeatable performance.

Features:

  • Frequency Range: 100 Hz - 100 MHz
  • Transfer Impedance: -90 to -43 dB Ohms
  • Max CW Current: 60 Amps
  • Max Current (at 400 Hz): 300 Amps
  • Max Peak Current: 5,000 Amps
  • Connector: N-type
Frequency Range:100 Hz - 100 MHz
Transfer Impedance (ZT)0.005 ohms (nominal)
Max Primary Current
(DC - 60 Hz)
800 Amps
Max Primary Current
(400 Hz)
300 Amps
Max Primary Current CW50 Amps
Peak Pulse Current30,000 Amps
Connector:N-Type, Female
Physical Dimensions
Aperture:2.6" (66 mm)
Diameter:5.27" (134 mm)
Width:2.15" (54.6 mm)
Weight:5.4 lb.'s (2.46 Kg)
Description

Conducted currents can be measured without making direct contact with the source conductor or metallic surface by means of clamp-on current probes. The BCP-619 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other 50-ohm impedance instruments to measure quantitative magnitudes of current. Measurements can be made on single and multi-conductor cables, ground and bonding straps, shielded conduits, and on coaxial cables.

For ease and convenience of performing conducted measurements, all of our current probes utilize the split type clamp-on design. Small and lightweight, each Current Probe is manufactured to exacting standards, thus insuring repeatable performance.

Features:

  • Frequency Range: 100 Hz - 100 MHz
  • Transfer Impedance: -90 to -43 dB Ohms
  • Max CW Current: 60 Amps
  • Max Current (at 400 Hz): 300 Amps
  • Max Peak Current: 5,000 Amps
  • Connector: N-type