Close
You have no items in your shopping cart.

Chroma 61830 Regenerative Grid Simulator

30kVA
PURCHASE
AvailableQTYPrice
New:   0
+ -
$0.00
Used:   0
+ -
$0.00Configurations
X

Available Configurations

Market demand for Distributed Resource (DR) products such as PV inverters and wind energy systems is steadily growing as the world strives for clean renewable energy sources. This demand has created a need for rigorous regulation testing to standards such as IEEE 1547 / IEC 61000-3-15 / IEC 62116, ensuring proper and safe operation of on-grid products. It has become critical for manufacturers to conduct these tests to prove compliance and to relieve product liability concerns. Chroma’s 61800 Regenerative Grid Simulator has been designed to fulfill these test requirements by providing a full 4 quadrant, fully regenerative, grid simulator with advanced features for compliance, safety, and product verification testing.

  • Power rating: 30kVA, 45kVA, 60KVA, 105kVA up to 630kVA, single or three-phase output
  • Output Voltage: 0~330VL-N / 0~570VL-L
    • 0~400VL-N option without using a transformer
    • 0~500VL-N option without using a transformer (61800-100)
    • 210kVA 1000VL-N XHV option without using a transformer (2×61800-100)
  • Output Frequency: DC, 30Hz~100Hz
    • 1kHz output frequency option (61800-100)
  • Maximum power delivered down to 200VL-N (61800-100 – 250VL-N))
  • Full 4 quadrants, fully regenerative up to 100% of output current rating
  • Specifically designed for PV inverter, Smart Grid, and EV related test applications
  • Programmable slew rate settings for voltage and frequency
  • Programmable voltage and current limits
  • Turn on, turn off phase angle control
  • LIST, PULSE, STEP mode functions for testing Power Line Disturbance (PLD) simulation
  • Voltage dips, short interruption, and voltage variation simulation
  • Harmonics, inter-harmonics waveform synthesizer
  • Comprehensive measurement capability, including current harmonics
  • Analog programmable interfaces
  • Remote interface: GPIB, RS-232, USB, and Ethernet
  • Parallel output for higher power applications (three-phase only)

Description

Market demand for Distributed Resource (DR) products such as PV inverters and wind energy systems is steadily growing as the world strives for clean renewable energy sources. This demand has created a need for rigorous regulation testing to standards such as IEEE 1547 / IEC 61000-3-15 / IEC 62116, ensuring proper and safe operation of on-grid products. It has become critical for manufacturers to conduct these tests to prove compliance and to relieve product liability concerns. Chroma’s 61800 Regenerative Grid Simulator has been designed to fulfill these test requirements by providing a full 4 quadrant, fully regenerative, grid simulator with advanced features for compliance, safety, and product verification testing.